1998 355 F1 wiring diagrams | FerrariChat

1998 355 F1 wiring diagrams

Discussion in '348/355' started by WATSON, Nov 15, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. WATSON

    WATSON Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Sep 9, 2010
    Messages:
    23,926
    Location:
    WI
    Any help on where I might purchase / download the wiring diagrams for a 1998 355 F1 spider would be most appreciated.

    Thanks,

    Randy
     
  2. m5guy

    m5guy Formula 3

    Joined:
    Aug 17, 2008
    Messages:
    1,627
    Location:
    Ventura, CA.
    Full Name:
    Greg
    Randy, have you gone to www.the355.com to access the workshop manual PDFs? You will need to register on the site (free) to access the workshop manual pages, but once you do, they can be downloaded to your desktop.

    Good luck on your project!
     
  3. WATSON

    WATSON Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Sep 9, 2010
    Messages:
    23,926
    Location:
    WI
    Thanks for the suggestion....I have been there. Great resource. I found another place where I could download the entire manual and had the whole thing printed for nighttime reading :)

    Unfortunately it does not have the complete wiring diagrams. I need to do a wire-by-wire tracing on most of the harnesses to get this car correct and need that detail.

    Any other ideas out there?

    Thanks,

    Randy
     
  4. WATSON

    WATSON Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Sep 9, 2010
    Messages:
    23,926
    Location:
    WI
    I should be a little more specific. The wiring diagram in section three of the manual that is referenced and the only one I have fond so far is for a 1994 2.7 car.
     

Share This Page