Who supplies the copper crush washer for a carb 308 oil pan? Some said the crush washer dimensions are ID: 22mm OD:29MM. Who? Where?
dealerships have them. One gave me 3 for free once. How much can they be. 22 mm sounds right they are large. If you can't find one, just heat the thing up to cherry red and let it cool.
To get ticky-tack, the (stock) engine oil drain plug and the gearbox oil drain and fill plugs use a 22x28x1.5 mm Copper washer size (10263460), and the (stock) transfer case drain and fill plugs use a 22x27x1.5 mm Copper washer size (10279560). I always just used 22x27x1.5 mm at all those locations (and I'm sure a 22x29x1.5 mm size would work just fine too). If you do your own fluids work, and plan on doing a few changes, it makes sense to buy 20~25 total from Global Metrics in Belmont, CA.
Steve's got it right. He set me on to this place a few months back. I bought a bag of 25 and it should last me for as long as I own the car.
I took one to napa and they matched it for something like 25 cents. I know, I know for you purists its not OEM.... bought a pocket full of em.
I bought a bag of these Maserati washers. Work great. http://cgi.ebay.com/ebaymotors/MASERATI-3500-MISTRAL-GHIBLI-BORA-VALVE-COVER-WASHERS-_W0QQcmdZViewItemQQhashZitem4838644415QQitemZ310183740437QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
