New stuff installed | FerrariChat
Buy

New stuff installed

Discussion in '348/355' started by tcannon, May 15, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #1 tcannon, May 15, 2011
    Last edited by a moderator: Sep 7, 2017
    Here is how I spent my weekend. :) I first installed my new Hill Engineering pedal faces and dead pedal. I placed a sheet of black rubber under the dead pedal to give it a better look through the holes. Then I installed the Hill Eng. steering wheel spacer (1"). Next, I installed the amp and subwoofer into the center console. In order to have room, I had to remove the seatbelt mousetrap ECU's. The amp was a tight fit but I made it. The subwoofer is an 8" free air unit. It will not blow your doors off but it does give a nice low end to my sound system. Thanks to Roberto for inspiring me to do this. ;) I am waiting on my MAF sensor to return from Python Injection after they rebuilt it. So, I will not be able to test out how the wheel spacer works. But just sitting in the car, it feels good. I will let you know how it feels as soon as I get to test it. I expect the MAF to arrive Tuesday. Fun weekend! :D
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. jayz

    jayz Formula 3

    Jan 16, 2006
    1,153
    Los Angeles, CA
    Full Name:
    Jess
    #2 jayz, May 15, 2011
    Nice!
     
  3. mowater

    mowater Formula Junior

    May 24, 2004
    362
    #3 mowater, May 15, 2011
    congrats

    may i ask where your floor mats are from?
    do they have a script under the cavallino?
     
  4. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #4 tcannon, May 15, 2011
    No, there is no script under the cavallino. They were in the car when I bought it. I assumed they were stock.
     
  5. rbellezza

    rbellezza F1 Rookie

    Jun 18, 2008
    2,793
    Henderson, NV
    Full Name:
    Roberto Bellezza
    #5 rbellezza, May 15, 2011
    Nice work !
     
  6. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,234
    Mount Isa, Australia
    Full Name:
    Pap
    #6 PAP 348, May 15, 2011
    Nice work mate, it's always good keeping busy by working on the Ferrari. :D:D
     
  7. jhfields

    jhfields Karting

    Jun 2, 2010
    102
    paducah ky.
    Full Name:
    John H Fields
    #7 jhfields, May 15, 2011
    looks good
     
  8. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #8 tcannon, May 15, 2011
    Thanks guys! Have any of you tried the Hill steering wheel spacer?
     
  9. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,234
    Mount Isa, Australia
    Full Name:
    Pap
    #9 PAP 348, May 15, 2011
    There are a few guys on here that have them installed in their Ferraris. :):)

    From memory, a couple were taller guys and they said it was beneficial having one fitted. :):)
     
  10. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,789
    Ontario, Canada
    Full Name:
    Mike
    #10 AceMaster, May 16, 2011
    Nice work Todd
     
  11. gcthree

    gcthree Formula Junior

    Jul 18, 2008
    323
    Williamsburg, Va.
    #11 gcthree, May 16, 2011
    Last edited by a moderator: Sep 7, 2017
    I've had mine installed for the past year, and it makes a big difference by bringing the wheel back to a position where you can work the wheel.

    This a shot from when I removed the steering column shroud for refinishing and to remove the air bag warning lamp because of the aftermarket wheel.

    Image Unavailable, Please Login
     
  12. Kaivball

    Kaivball Three Time F1 World Champ
    Owner

    Jan 11, 2007
    35,997
    Kalifornia
    #12 Kaivball, May 16, 2011
    You removed your mouse ecu's?

    So where are they stuck now? By the seat or the door near the front?

    I am using the SS seats so I have to use the mouse rail. I am trying to figure out how to permanently make the seatbelt clip stay by the seat instead of running back to the front whenever I open the door.

    How do I make the stop by the seat permanently?

    Kai
     
  13. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #13 tcannon, May 16, 2011
    Just close the doors and wait for the seat belt clips to run down beside the seats. Then unplug the ecu's. Done. ;)
     
  14. S-T48

    S-T48 Formula Junior
    Silver Subscribed

    Oct 30, 2008
    576
    Stevenson Ranch, CA
    #14 S-T48, May 16, 2011
    Here is what you do. Get in the passenger seat, both doors closed, turn ignition to start - this will ensure both mice are engaged (next to the seat). Now, you can turn off the ignition (do not open any of the doors), while seated, reach down and disconnect both ecu's. FYI, just be careful not the brake the ecu connection, as one side comes out before you can unhook the connection. its much easier than said......study the connection before disconnecting. Good Luck.....
     
  15. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #15 tcannon, May 17, 2011
    Sorry, I forgot to add the part about turning the key off before unplugging the ecu's. It is a tight fit to reach down and unplug them with the doors shut. If you have someone to help you, you can have them leave the passenger door open and reach in and press the pushbuttons in the door jab. This will move the seat belt clip and still allow you to get into the floor board to easily unplug the ecu's.
     
  16. Kaivball

    Kaivball Three Time F1 World Champ
    Owner

    Jan 11, 2007
    35,997
    Kalifornia
    #16 Kaivball, May 17, 2011
    That's a good idea.

    I had a hard time envisioning my 6'4" frame bending over in the passenger seat doing this...

    Kai
     
  17. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #17 tcannon, May 17, 2011
    Thanks Bob for the pic and your feedback! I really look forward to trying the spacer out soon. My MAF should arrive tomorrow or Wednesday so it will not be long now. ;)
     
  18. S-T48

    S-T48 Formula Junior
    Silver Subscribed

    Oct 30, 2008
    576
    Stevenson Ranch, CA
    #18 S-T48, May 17, 2011
    Good suggestion. This was my initial idea, but I couldn't locate the pushbuttons. Where is it???
     
  19. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #19 tcannon, May 17, 2011
    They are located just under the lower door hinge. There are two push buttons. You only need to press one of them but I forget which one. Just push one at a time until the seat belt clip takes off. ;)
     
  20. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #20 tcannon, May 17, 2011
    Hey PAP, what is with the new avatar? Do the colors represent something for you?
     
  21. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,234
    Mount Isa, Australia
    Full Name:
    Pap
    #21 PAP 348, May 17, 2011
    I glad you mentioned it Todd. :D:D

    My fav Ferrari colour combo is red/tan. :eek::eek:

    Some guys in the Aussie section have been giving me **** about it lately, so I decided yesterday to change my avatar to red/tan. :D:D
     
  22. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #22 tcannon, May 17, 2011
    Gotcha. ;)
     
  23. jmiff348

    jmiff348 Formula 3
    Rossa Subscribed

    Nov 30, 2006
    2,369
    Texas, USA
    Full Name:
    Jarrett
    #23 jmiff348, May 17, 2011
    Nice stuff. No 348 should be left to suffer through its life without these cool HE bolt-ons. I disconnected those pesky mice not long after I purchased my 348. What were they thinking?? Wish I had Kai's Challenge seats, though...
     
  24. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #24 tcannon, May 19, 2011
    I received my rebuilt MAF sensor today! Wow! My 348 has never run so smooth or strong! :D:D Idle is like butter. No CEL's. Great stuff! Python Injection did a great job on my MAF. I have now had both of them done by Python. I highly recommend them. Anyway, I just got back from a two hour joy ride. I am loving the Hill Eng. steering wheel spacer!!! It made me so much more comfortable and I felt like I had better leverage on the wheel in the turns. So, any of you out there who are thinking about trying one, just do it! The turn signal is still close enough that you can reach it with your fingers without having to stretch out for it. Thanks Ricambi and Hill! ;)
     
  25. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,234
    Mount Isa, Australia
    Full Name:
    Pap
    #25 PAP 348, May 19, 2011
    That is great to hear!! I cleaned my MAFs a few years ago. Car was running perfect before and after, but they did have some gunk on the 'hot wire' which is why I cleaned them both. :):)

    Impressed about the wheel spacer! Thanks for sharing and the two hour joy ride would have been fun. :):)
     

Share This Page