I did see it somewhere. | FerrariChat

I did see it somewhere.

Discussion in '308/328' started by samson, May 16, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. samson

    samson Karting
    Silver Subscribed

    Aug 20, 2005
    230
    Port Saint Lucie, Fl
    Full Name:
    Sam Goldstein
    I can't find it in the search. I'm trying to bypass the pop up headlight and just use running lights on the first setting. Any help would be appreciated.
    Thanks, Sam
     
  2. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,141
    Savannah
    Mike996 i think did a thread on here when he had his 308. He had a different user name, but it should have updated? it was worded "headlight upgrade" I think. I would look, but I got to go.....
     
  3. Hans

    Hans F1 Veteran

    Feb 17, 2006
    7,734
    Hilversum, Netherlands
    Full Name:
    Hans Teijgeler
    The previous owner of my GT 4 has done a conversion. Not sure how he has done it, but it involves using the antenna lift switch to override the popup light motors. I can switch on my lights in whatever setitng, but if that switch is flipped forward, the lights won't come up. With the switch in the backward position, the lights act as they have always done - following the regular light stalk.

    Good luck!

    Hans
     
  4. maurice70

    maurice70 F1 Rookie

    Jan 25, 2004
    4,334
    Sydney
    Full Name:
    maurice T
    Its done using three diodes in a Y configuration.I did it on my GT4 but it was a few years ago but I cant remember exactly how.I followed a write up on ferrariclub.com
     
  5. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    58,137
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    #5 mwr4440, May 17, 2011
    Last edited by a moderator: Sep 7, 2017
  6. david

    david Formula Junior

    Feb 21, 2001
    810
    Northwest
    Full Name:
    david
    I followed this procedure to do mine and it works fine. I remember that I didn't actually cut the wires as directed. I figured out some way to do the whole assembly where it is reversible if anyone ever wanted to change it back to stock. I don't remember exactly what I did, but I do remember it wasn't too complex.
     
  7. maurice70

    maurice70 F1 Rookie

    Jan 25, 2004
    4,334
    Sydney
    Full Name:
    maurice T
    My apologies,I thought it was three diodes but its actually two diodes.
     

Share This Page