Non working drivers blinker...what to check mext | FerrariChat
Buy

Non working drivers blinker...what to check mext

Discussion in '308/328' started by stevel48, Jun 22, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. stevel48

    stevel48 Formula 3

    Jan 4, 2005
    1,998
    Metrowest MA
    Full Name:
    Steve (85 308 Owner)
    #1 stevel48, Jun 22, 2011
    Bulb is ok. Wiring up front to the bulbs is ok. All other blinkers/lights work. Could a bad relay cause just the drivers blinker to go bad?
     
  2. cmt6891

    cmt6891 Formula 3

    Feb 25, 2008
    1,340
    Encino, Ca
    Full Name:
    Carl T
    #2 cmt6891, Jun 22, 2011
    Turn signal indicator is connected through the hazard switch circuit. If all else works including the right side turn signal and the bulbs are good then it must be a 12v wiring issue to that side or a bad contact at the column switch. If both side turn indicators are not working try working the hazard switch on and off a few times with activiating the column stalk. If they work then, you will need to clean the contacts on the hazard switch.
     

Share This Page