Car Detailers

I have not used this mob, but the dude seems to know his stuff very well and is Melbourne based: http://aussieexotics.com/forum/eurogloss-prestige/

 

It's a shame that you're over worked, maybe Carl could help he's good at polishing.

 

I hope you can find one that starts work after noon.

 

Harry Rouse

 

Yes

 

Surely, you know Harry?

I'm sorry, you told me not to call you surely

 

Mario,in the white van parked out the front of my home?
Whom do they use in east far kew?

 

I can detail Ferraris to concours standards - for a small or nominal fee.

 

Contact Damien at "Final Inspection" on 0402037423.
He has a F40 in the family and you should see the car detail that was done on that.

He specialises in exotics!

It's on his website but you have to come to him.
Tell him I referred you.
Rob.
Car Tint.

 

Undoubtedly, Mario from Euroglassprestige knows his stuff and is a perfectionist with whom I have no problem recommending (although it will not be cheap). I also spoke to Damien at the Ferrari concours a couple of years ago and he seemed competent. *Another you may wish to consider is Jean-Pierre Domain from Unsurpassed Vehicle Image (0403 770 525), I know a couple of Porsche guys that swear by him.

*Please note: He has sourced photos from me of a car he worked on.

 

the best guy in the business is Colin.

 

What are his details?

 

the guy that does all of my brother inlaws cars.

 

I can give a +1 on that as well, very good work indeed.

Disclosure:- He uses my foam buffing pads.

 

Nobody that does it properly will be cheap. It is quite labour intensive and some of the polishes can be very expensive indeed.

Reality is that most "details" are not really proper details.

 

200 hours for a quality concour detail,on a car that is already been showed?

 

A top notch detail on a Ferrari with reasonably good paint should set you back around $1500, we do them here and they all cost around that figure to do a really nice job.

 

for 1,500 I can a car painted.

 

I have seen cars with $15k details and the F40 that was done would have been $12k (from memory) according to the web thread getting around at the time.

 

One of those little diecast ones that Pap collects ?