Testarossa transmission breather on clutch housing | FerrariChat
Buy

Testarossa transmission breather on clutch housing

Discussion in 'Boxers/TR/M' started by Philwozza, Jul 24, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Philwozza

    Philwozza Formula 3

    Apr 23, 2009
    2,045
    Winchester UK
    Full Name:
    Phil Worrall
    #1 Philwozza, Jul 24, 2011
    Last edited by a moderator: Sep 7, 2017
  2. Melvok

    Melvok F1 World Champ
    Owner Silver Subscribed

    Jul 25, 2008
    14,254
    Amersfoort, The Netherlands, Europe.
    Full Name:
    Mel
    #2 Melvok, Jul 24, 2011
    Hi Phil ..... why do you want to remove it ?

    And are you not driving the beast at the moment .... :) ?
     
  3. portogts

    portogts Formula 3
    Owner Project Master

    Aug 31, 2008
    2,344
    Maia-Portugal
    Full Name:
    Vitor Sousa
    #3 portogts, Jul 24, 2011
    I don´t think it has any thread on the housing.
    You just pull it off...
     
  4. Rossa a nord di

    Rossa a nord di Karting

    Apr 30, 2008
    210
    Barrie, Ontario, Can
    Full Name:
    Brent Pilon
    #4 Rossa a nord di, Jul 24, 2011
    Hi Phil
    I lost the cap to that breather it just came off but I believe that the part you are referencing is a permanent fixture. I don't think you can remove it. I have my bell housing off now and just looked at it.

    ...and a very good question. "Why?". Is it bent?

    Take Care. Brent.
     
  5. bazzis

    bazzis Karting

    Nov 5, 2003
    217
    Sarratt, Herts
    #5 bazzis, Jul 25, 2011
    on my 512 tr its just a tight push fit, had to replace mine a few years ago.........
     
  6. Philwozza

    Philwozza Formula 3

    Apr 23, 2009
    2,045
    Winchester UK
    Full Name:
    Phil Worrall
    #6 Philwozza, Jul 25, 2011
    I am changing the clutch at the moment and as this part is looking a bit grubby I thought that I would replace it or re-plate it but can't see how to get it off.

    So its a pair of grip tomorrow then :)

    P
     
  7. Philwozza

    Philwozza Formula 3

    Apr 23, 2009
    2,045
    Winchester UK
    Full Name:
    Phil Worrall
    #7 Philwozza, Jul 25, 2011
    It part of my preparation for this years concourse competition Mel, hard work all this polishing :D

    Take care

    P
     

Share This Page