I have the Hi-Fi sound in my 08 F430, how do I add the Ipod connection in the glove box? Cost? Thanks!
I would like to know too...however, on my 06 430, there is a SD SLOT behind the face plate...which is almost as equal to an iPod.
it takes @ 1 hr or so / the radio comes out of the dash the cd changer gets unplugged and the ipod interface plugs into the same port the cdc was plugged into....Next the ipod cable need to be routed to the back of the glovebox and then the ipod cable needs to be run into the glove compartment and normally a hole has to be made to get it into the compartment. I use a 1.25 inch diameter hole with a plastic grommet to fill the hole. The interface can be aquired from Becker http://www.beckerautosound.com/ if they have it in stock it if not I have 1 left... Scott
There's several picture threads covering this modification over the years - try a search on '360 ipod'
Your welcome... Last one I did the customer has an iphone so I ran it into the pocket in the console so the iphone could charge and he didnt have put it in the glovebox...(custom work) Image Unavailable, Please Login Image Unavailable, Please Login
FYI, you do NOT have to remove the radio to plug in the ipod cable. I got a flashlight and got down under the dash on the driver side floor and from there, I could see the CD changer plug and unplug it and snap the ipod cable in Step 1. Purchase the ipod cable from Becker Step 2. Install in 5 minutes viola!
is this an 8 or 10 pin? I see a few here: http://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l2736&_nkw=becker+ipod+iphone+cable