355 and Tubi | FerrariChat
Buy

355 and Tubi

Discussion in '348/355' started by 355tsr, Oct 12, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 2
  1. 355tsr

    355tsr Formula Junior

    Mar 9, 2010
    322
    #1 355tsr, Oct 12, 2011
    Last edited: Oct 12, 2011
    does anyone run their 355 with a tubi and leave off the upper heat shield...such a shame to cover it, but too much heat is a bad thing too, does the tubi give off as much heat as a OEM?
     
  2. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,055
    USA
    #2 f355spider, Oct 12, 2011
    Don't do it...I would suspect you will dramatically heat up the air boxes. That means heating up the incoming air to the engine...not good for power. Plus, all the rubber intake hoses and the plastic MAF will take a beating from the heat as well.
     
  3. gus355

    gus355 Formula Junior

    Aug 3, 2011
    569
    B.C. and WA
    #3 gus355, Oct 12, 2011
    I know what you are saying, not only that, but the heat shield itself is the ugliest piece of....
     
  4. GerryD

    GerryD Formula 3

    May 5, 2010
    2,444
    North of TO
    Full Name:
    Guido
    #4 GerryD, Oct 12, 2011
    When the tubi changes color, you wont want to look at it anymore. The heat shield is there for a good reason.
     
  5. gus355

    gus355 Formula Junior

    Aug 3, 2011
    569
    B.C. and WA
    #5 gus355, Oct 13, 2011
    Nonsense, at that point it is time to remove it and have it re-polished :)

    Maybe someone will make a nice heatshield out of hi-temp glass...
     
  6. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #6 mpodgor, Oct 13, 2011
    Last edited by a moderator: Sep 7, 2017
    I saw this nice stainless steal cover on Ebay. http://cgi.ebay.com/ebaymotors/Ferrari-355-Muffler-Heat-Shield-Stainless-Steel-Cover-/180736722014?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a14bf845e#ht_667wt_958
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  7. gus355

    gus355 Formula Junior

    Aug 3, 2011
    569
    B.C. and WA
    #7 gus355, Oct 13, 2011
  8. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #8 mpodgor, Oct 13, 2011
    I would be interested. I'll drop the seller an email and put it out there. He also sells some nice stainless cv heat shields.
     
  9. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #9 mpodgor, Oct 13, 2011
    Last edited by a moderator: Sep 7, 2017
    http://cgi.ebay.com/ebaymotors/Ferrari-355-CV-Heat-Shields-Stainless-Steel-Covers-164481-164482-/180736687545?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a14befdb9#ht_508wt_958
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  10. gus355

    gus355 Formula Junior

    Aug 3, 2011
    569
    B.C. and WA
    #10 gus355, Oct 13, 2011
  11. Labman

    Labman F1 Rookie
    Silver Subscribed

    Jun 25, 2010
    3,803
    Long Island, NY
    Full Name:
    Steve
    #11 Labman, Oct 13, 2011
  12. davehelms

    davehelms F1 Rookie

    Jan 3, 2004
    4,629
    Full Name:
    Dave Helms
    #12 davehelms, Oct 13, 2011
    What were you thinking Gerry..... Fashion over Function, one is a must, the other just a detail.
     
  13. 355tsr

    355tsr Formula Junior

    Mar 9, 2010
    322
    #13 355tsr, Oct 13, 2011
    I know what you mean about the stainless tubi changing colors not as pretty, but on oxidized stainless you can mix 50/50 water and muratic acid, put it in an old spray bottle. spray the stainless down wait 2 minutes wipe off then hose off and walla shiny again
     
  14. gus355

    gus355 Formula Junior

    Aug 3, 2011
    569
    B.C. and WA
    #14 gus355, Oct 13, 2011
    Have you actually tried this? I just had my fabspeed cats out which were developing some surface oxidation, I used pickling paste on them which brought them out like new -
     
  15. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #15 mpodgor, Oct 13, 2011
    Last edited by a moderator: Sep 7, 2017
  16. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #16 mpodgor, Oct 13, 2011
    I just sent a message to the seller asking him about a group buy. I would think if the $ price was right a whole lot of 355 people would want this. Me included. Since it goes over the original cover it will make it look much cleaner. And may provide extra shielding.
    I'll keep yall informed.
    Mike
     
  17. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #17 mpodgor, Oct 13, 2011
    Standing by.......
     
  18. gus355

    gus355 Formula Junior

    Aug 3, 2011
    569
    B.C. and WA
    #18 gus355, Oct 13, 2011
    I think if one were to line the underside with more heatshield material and maybe even sndwich one of those heat mats in between this and the stock heatshield, it may cut the heat going into the airboxes even more.
     
  19. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #19 mpodgor, Oct 13, 2011
    One could wrap the air intake boxes and tubes with insulating material. (forget how it looks) Wow, did I just think of that? Engines like cold air. Probably why my old muscle car ran so strong in Minnesota!
     
  20. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #20 mpodgor, Oct 13, 2011
    Last edited by a moderator: Nov 9, 2014
    A discount for a group Buy?
     
  21. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #21 mpodgor, Oct 13, 2011
    Last edited by a moderator: Nov 9, 2014
    May I speak for the masses here. We like them! But we feel the price is a tad too high. I am confident that the interest level will be HIGH. How about a discount for a group buy? That's the way we roll here. Regards, Michael.
     
  22. gus355

    gus355 Formula Junior

    Aug 3, 2011
    569
    B.C. and WA
    #22 gus355, Oct 13, 2011
    Yes, I too am interested in a group buy price -
     
  23. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #23 mpodgor, Oct 13, 2011
    Last edited by a moderator: Nov 9, 2014
    I am sure of this. Keep us posted. Thanks.
     
  24. mpodgor

    mpodgor Formula Junior

    Aug 15, 2005
    661
    San Mateo, Ca.
    Full Name:
    Michael J Podgorski
    #24 mpodgor, Oct 13, 2011
    Last edited by a moderator: Nov 9, 2014
    Think about it.
     
  25. gus355

    gus355 Formula Junior

    Aug 3, 2011
    569
    B.C. and WA
    #25 gus355, Oct 13, 2011
    I would think this piece would be hugely popular in the $200+ range. Even in mild steel or aluminum.
     
Page 1 of 2

Share This Page