OBDII Unit | FerrariChat
Buy

OBDII Unit

Discussion in 'Technical Q&A' started by jim94-348, Nov 14, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jim94-348

    jim94-348 Formula Junior
    Owner Silver Subscribed

    Aug 19, 2010
    981
    Greenville, NC
    Full Name:
    Jim
    #1 jim94-348, Nov 14, 2011
    I have an OBDII code reader that I read the code on my 360 the other day. I was able to read it but I couldn't reset it. It would send the clear command but no luck. The code was a simple P0152 so I should have been able to clear it. My local exotic shop said that not all OBDII units can reset codes. Is there one on the market that can at a reasonable price?
     
  2. FerrariDublin

    FerrariDublin F1 Rookie

    Jun 14, 2009
    3,457
    Dublin, Ireland
    Full Name:
    Greg
    #2 FerrariDublin, Nov 15, 2011
    The one I use (ScanTool.Net with Bluetooth (or wired) OBD connector can clear codes.

    I suspect there are better (and/or more intuitive) than mine on the market but my combination does work.
     
  3. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,629
    Campbell, CA
    Full Name:
    John Zornes
    #3 Skidkid, Nov 15, 2011
    Most work but you may be having an issue with Campaign 148. The campaign fixes a missing ground pin the the OBD port. Without that connection you probably can't drive the reset signal and you will get sporadic and incorrect reads as well.
     
  4. ttdang123

    ttdang123 Formula Junior

    Nov 28, 2009
    706
    North San Diego CA
    Full Name:
    Tung
    #4 ttdang123, Nov 15, 2011
    Last edited by a moderator: Sep 7, 2017
  5. jim94-348

    jim94-348 Formula Junior
    Owner Silver Subscribed

    Aug 19, 2010
    981
    Greenville, NC
    Full Name:
    Jim
    #5 jim94-348, Nov 16, 2011
    Does anyone know where to get a single pin for the connector so I can add it?
     
  6. ttdang123

    ttdang123 Formula Junior

    Nov 28, 2009
    706
    North San Diego CA
    Full Name:
    Tung
    #6 ttdang123, Nov 16, 2011
    I am thinking they will be avail at Frys or Radioshacks?
     
  7. jim94-348

    jim94-348 Formula Junior
    Owner Silver Subscribed

    Aug 19, 2010
    981
    Greenville, NC
    Full Name:
    Jim
    #7 jim94-348, Nov 16, 2011
    Does anyone know the part number of the connector pin? I did a search on 135308 and nothing came up. I assume this is Ferrari's part number?
     
  8. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,629
    Campbell, CA
    Full Name:
    John Zornes
    #8 Skidkid, Nov 16, 2011
    Not a Ferrari part. It is a generic pin similar to a molex or ms pin. Tou can get one at radio shack, Fry's, most any place that sells electronic parts. Pull one out and look at the pin shape. Then you are good to go.
     

Share This Page