fry/reglet or similar products, anyone here deal with them?? | FerrariChat
Buy

fry/reglet or similar products, anyone here deal with them??

Discussion in 'Creative Arts' started by JeremyJon, Nov 16, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. JeremyJon

    JeremyJon F1 Veteran

    Jul 28, 2010
    7,569
    Calgary, Canada
    #1 JeremyJon, Nov 16, 2011
    i have a larger quote to develop, including making wall panels for a building lobby....client has spec'd stainless channel reveal for these arborite laminate panels, i'll be making

    http://fryreglet.com/products-revealpaneltrim.htm

    checked thier site, but don't have the profile i need....which is a U-channel, which will be routered into a channel at waist height....the other is a perimeter U-channel, which also conceals the 1/2" board thickness

    if anyone in the architecture/design/contracting biz has some info, the helps me, would be greatful

    thanks in advance
     
  2. Jason Crandall

    Jason Crandall F1 Veteran

    Mar 25, 2004
    6,375
    ATL/CHS/MIA
    Full Name:
    Jason
    #2 Jason Crandall, Nov 18, 2011
    I'm using Fry Reglet on my new office build out. They install like a base board where the wall framing meets the floor. You'll cut out the sheet rock about 4 inches from the floor. They're stainless steel.

    Then you inlay whatever material you like. I have tile floors and using a wood inlay on the Fry Reglet.

    I'll take a pic.
     
  3. JeremyJon

    JeremyJon F1 Veteran

    Jul 28, 2010
    7,569
    Calgary, Canada
    #3 JeremyJon, Nov 18, 2011
    actually i was looking for a dealer......but sounds like you had fun, post some pics :)

    i ended up having to order direct....get this, it's gonna cost $450 to ship, yikes!


     
  4. Amnster

    Amnster Karting

    Jul 25, 2005
    66
    NorCal
    #4 Amnster, Nov 18, 2011
  5. JeremyJon

    JeremyJon F1 Veteran

    Jul 28, 2010
    7,569
    Calgary, Canada
    #5 JeremyJon, Nov 18, 2011
    interesting....i'll check it out, thanks

    in my search i found similar products to fry reglet; pittcon, gordon & flannery


     

Share This Page