Capristo Bypass Installation | FerrariChat

Capristo Bypass Installation

Discussion in '348/355' started by eyboro, Dec 16, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. eyboro

    eyboro Formula Junior
    Silver Subscribed

    May 30, 2004
    989
    Chicago
    Full Name:
    Eitan
    I received my Capristo bypass valve with no installation instructions, is there any instructions diagram for installing here on Fchat? It seems simple enough but I don't want to make any mistakes. Thanks in advance.
     
  2. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,055
    USA
    I did a write up on it that should be in the archives. If you need help, feel free to PM me.
    I have some pictures provided by Capristo I can send you.
     
  3. eyboro

    eyboro Formula Junior
    Silver Subscribed

    May 30, 2004
    989
    Chicago
    Full Name:
    Eitan
    #4 eyboro, Dec 18, 2011
    Last edited by a moderator: Sep 7, 2017
    I just installed the bypass, tested it by having my son look at the valve while I revved the engine and my son can see the valve move up and down, so it works. My question is on the side of the valve by the spring I feel a little exhaust leak, is that normal? Also my valve came with a long tube (6' long) to attach the bypass actuator to the solenoid , do I use the whole length or do you trim the tube to whatever length needed.

    Here are some pictures of my installation and where the leak is from.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  4. race850i

    race850i Karting

    Jan 6, 2010
    132
    Germany
    Full Name:
    Themis
    The small leak is totally normal, all valves have it!
     

Share This Page