Alternator wire harness | FerrariChat

Alternator wire harness

Discussion in '348/355' started by fvracing, Aug 17, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. fvracing

    fvracing Karting

    Nov 4, 2003
    68
    Winnipeg
    Full Name:
    Pete
    Anyone know of a cross reference for the 3 prong alternator harness for a 2.7 F355? The connector itself is broken and I can't imagine spending $1700.00 for a new harness from Ferrari. All I really need is the connector on the end to splice into my original harness.

    Cheers
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,038
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
  3. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,661
    San Carlos, CA
    Full Name:
    Mitchell Le
    that is a good link, Steve.

    I would figure out a much different solution than a $1700 harness. In fact, I would never buy a $1700 harness. Connectors, solders, heat-shrink, etc...
     
  4. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    17,913
    USA
    If you don't see the connector in the link provided by Steve above, I would try going to a couple alternator rebuild shops, they should have it.

    One of the larger chains on the west coast is Romaine Electric, I have received good service from them:
    http://www.romaineelectric.com/page4.html
     
  5. fvracing

    fvracing Karting

    Nov 4, 2003
    68
    Winnipeg
    Full Name:
    Pete
    Thanks sooo much guys. I found the exact connector on the site Steve put up.

    Cheers
     
  6. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,038
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    Can you please identify it here for reference?
     
  7. RSO1091

    RSO1091 Formula 3

    Mar 31, 2012
    1,547
    Idyllwild, CA.
    Full Name:
    Henry S.
    +1, I had mine rebuilt by an auto electric shop, but would like to replace it eventually as well. Just need the corresponding part number from the site. Thanks...
     
  8. bobzdar

    bobzdar F1 Veteran

    Sep 22, 2008
    6,367
    Richmond
    Full Name:
    Pete
    Looking for a new plug for mine and Amazon has them, search for 3 way nippondenso connector and a few options come up, about $14.
     

Share This Page