This ad with its optimistic delivery date for the new P250 was published in Car magazine December 1970 shortly after the Turin show where the orange and white pre-production cars were first shown on the Lamborghini and Bertone stands respectively. Image Unavailable, Please Login
Here is another 1970s period ad for Italian fashion designer Nino Cerruti, staged at Sant Agata. Looks like a RHD car too. Enjoy! Image Unavailable, Please Login
After years of searching for a Lamborghini cars, I am now a new owner of a 1975 Urraco. The car is scheduled to be delivered on Friday. Pictures and details will follow. By the way, I am looking to buy a stock wheel and tool kit. If you have them sitting in your garage, please kindly send me a private message. Tom/Colorado
My Urraco P111 arrived at 2.50 pm MST today. It looks nice, drives well, and sounds good. Image Unavailable, Please Login
Congrats! Looks like a gem. Is this the same yellow 75 that was on eBay out here in CA? http://cgi.ebay.com/ebaymotors/Urraco-P111-USA-2-5-/200849024948?_trksid=p3984.m1438.l2649&ssPageName=STRK:MEWAX:IT&forcev4exp=true#ht_500wt_948 What is the condition of the engine and gearbox?
Yes, it is. I drove it around town yesterday. Engine and gearbox are in good shape. Will take a longer drive to a local cars and coffee this morning. Let's see how it perform. Overall, my evaluation of the car is above average condition.
My Urraco came with Fulda 205/70/14 tires. Are they one of original brands used by Lamborghini back in 1975 ?
Anyone have BMW e28 or e34 15X7.5 or 16x7.5 on their Urraco? I am thinking to put the stock 14x7.5 wheels in storage and up the wheel size a bit so I will have more tire options.
the best tire was/is Michelin XWX 205, I did run the XWX 215 on the rear and had no rubbing issues. Valentino suggested that I run 195 in fron and 205 in the rear - I did that for a set. better steering control. I remember that Pirelli offered P5 tires at the time.
The P300 had 195s in front and 205s at the rear on 14 x 7.5 rims. The Silhouette had 195s in front on 15 x 8 rims. Last I heard the 14" 195 XWX was no longer being made. The Eurospares 15 x 8 replicas would look good on an Urraco and provide a greater selection of tyre options!
I measured my Urraco wiper arm for bayonet wiper blades fitting and it is 9 mm. I looked around can only find 7 mm bayonet wiper blades. Does anyone know where I can get 9 mm bayonet ones?
Hi all, I'm an experience F-car owner now looking for a P250 or 300 - I guess the 300 is the one to go for. I wondered if any f-chatters in the UK have any leads on Urracos for sale in the UK Also does anyone have a scan of the workshop manual for 250 and/or 300 ? I like to read up on the car before getting one. thanks Lee
Can you take a photo. I'm running 2 18inch wipers with old hardware, maybe stock. Is this the measurement you are talking? Image Unavailable, Please Login Image Unavailable, Please Login
Lee, Visit this website for Urraco workshop manual: http://www.inrodaggio.com/html/downloads1.html I like P250 engine. It is simpler and heads are smaller so more room for your hands. Tom
Well, I found a solution for the wiper. Used TRICO 44-190 wiper refill (a pair) and worked. It cost $7.49 at O'Reilly. Keep all other parts original (Arman). Good to go.
Does anyone has a pic showing where the clear flexible drain hose of the black engine lid on the top of left side supposes to go? I do not see any holes on the fuel filter side or near the gas cap area for the hose to drain the water.
Below is a pic of an Urraco with the hose, but I am sure where it go down to? Image Unavailable, Please Login