355 power unit bleed? | FerrariChat

355 power unit bleed?

Discussion in '348/355' started by DavidsF355Spider, Jan 13, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. DavidsF355Spider

    DavidsF355Spider Formula Junior

    Jul 3, 2005
    350
    Torrance, California
    Full Name:
    David
    Here's my problem, I installed a 355 power unit but it won't pressurize. I've bleed and nothing. What am I missing? Please help!!!

    Thanks
     
  2. rustybits

    rustybits F1 Rookie
    Professional Ferrari Technician

    Jan 28, 2007
    2,509
    Somewhere, anywhere
    Full Name:
    Eddie B
    What did you use to bleed it? SDx machine?
     
  3. WATSON

    WATSON Two Time F1 World Champ
    Owner Rossa Subscribed

    Sep 9, 2010
    23,912
    WI
    I assume you are talking about the F1 system?

    If you replaced the motor in the power unit....check the rotation.

    When I replaced my F1 pump with a 360 one, the leads on the new pump were reversed and the pump ran backwards.

    To properly bleed the system I think you need an SD computer to do it. That's how I had mine done anyway.
     
  4. DavidsF355Spider

    DavidsF355Spider Formula Junior

    Jul 3, 2005
    350
    Torrance, California
    Full Name:
    David
    thanks Watson, the wires were crossed
     

Share This Page