Looking for a Asymmetric, 2 post, low ceiling lift

That's exactly what I have: A7 under a 10 foot ceiling. Love it.

 

When we built, we planned to do a lift. I found the A7 first, then went to the builder with the specs and he put the slab in. It was pretty thick. When they came to install it, the guy was getting ready to drill the holes and made a comment about how "they always say it's as thick as it's supposed to be, but it seldom is." He was pretty surprised when ours was right!

For suspension work, it's easier to work down low. You'll find you raise and lower it all the time, which is the big benefit. For instance, if I am changing the oil, I first put it all the way up, pull the underbody stuff and crack the drain plugs loose. Then I set it almost down on the pan so it doesn't go everywhere and open the plugs. Once drained, I put the plugs in finger tight and crank it back up high to put everything back in comfort.

Over the last three years or so, the lift has had something on it for probably 8 months. Sometimes things just hang on it while I piddle. I love the thing!!!