Alternator Tensioner Bearing Failed! Help!!!

Then you will have to order from FNA in Jersey.

 

Digged half a day at my storage just cant seem to find that piece. I have the alternator but cant locate the bracket and the bolt that I remembered I stashed somewhere.

Sorry Michael.

 

Congrats!
Stooged it!!!

 

+1

Way to man up and gitterdun Stooge style.

 

Congratulations Mike. It was a long process, but worth it (as well as educational) in the end. Henry

 

And big ups to you for helping him out Henry, like a good Stooge.

 

I know this is old post. .. but curious. . What sound if any did it make prior to failure?

 

When driving at a steady speed on the highway, close all your windows. The bearing takes a long time to blow out but years before it goes, you will hear a bit of a low howling or drone coming from the engine right behind the drivers seat. To some this might sound normal because it does it for a long time before it goes. The sound it makes just before it completely blows must be scary.

 

Hmm how about an occasional clank or click?

 

The belt started smoking then broke. No warning was noticeable. I suggest changing the bearing & the adjustment bolt every major service.

 

You could if it makes you feel good but these take a long time to go and the main reason they go is because many over tighten the adjuster in hopes that the squeaky belt goes away instead of changing the belt. If one really wants to avoid this, I would change the bearing every 3rd engine out or just wait for it to fail if it even does. The fix is not too hard.......the second time around.

 

You're probably right. Every 3rd major replace the parts.
I just remember fixing the damn thing with the engine in. Horrible.