M3 Dash/plastic detailing | FerrariChat
Buy

M3 Dash/plastic detailing

Discussion in 'Detailing & Showroom' started by gsm348, Apr 29, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. gsm348

    gsm348 Karting

    Nov 7, 2003
    138
    Chicago
    Full Name:
    Greg
    #1 gsm348, Apr 29, 2013
    So I picked up an E46 M3 the other day that needs a little interior detailing. I like lexol for all the leather as that is what I have always used on the Ferraris but what should I use on the dash and plastic in this M3? There is no cracking it just looks like it needs to be cleaned.

    Thanks!

    Greg
     
  2. MobileJay

    MobileJay Formula 3

    Sep 9, 2006
    1,441
    Houston
    Full Name:
    Jason Cavallo
    #2 MobileJay, May 16, 2013
    Try 1Z Einszett Cockpit Premium. I use that on every car I work on and everyone loves the look. Leaves a matte finish, not a super shiney, or greasy look/feel. Protects as well.
     
  3. fskof

    fskof Karting

    Nov 23, 2005
    217
    Milwaukee, Wi
    Full Name:
    Frank
    #3 fskof, May 17, 2013
    X2 on 1Z Einszett Cockpit Premium. This stuff was designed for German interiors. I love how it leaves a clean finish and not a shiney or greasy look like the stuff that car dealers put on.
     
  4. Easyrider7467

    Easyrider7467 Formula Junior

    Nov 3, 2005
    980
    Northen N.J.
    Full Name:
    John
    #4 Easyrider7467, May 28, 2013
    I agree.

    Recently I've used Prima Nero interior stuff. Nice also.
     
  5. flightz71

    flightz71 Rookie

    May 8, 2005
    10
    San Francisco, CA
    #5 flightz71, Jun 16, 2013
    From a owner of a e46 for 10 years, do NOT use lexol on the leather. Nappa leather hates it. Use leatherique products. For dash and vinyl throughout the interior, use a diluted (4:1) water to formula ratio of p21s total auto wash and a scrubbing brush. Natural citrus cleaner will get rid of all the gunk, finish with a wet towel, and after dried, protect with aerospace 303. Designed to protect boat hulls from UV rays, and leaves a clean non nasty non shiny matte factory finish.

    Hope this helps!
    -Calvin
     

Share This Page