348 Fuel gauge stoped working! Help please. | FerrariChat

348 Fuel gauge stoped working! Help please.

Discussion in '348/355' started by 550Tim, Aug 9, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 550Tim

    550Tim Rookie

    Feb 11, 2013
    24
    Hi All,
    I was driving home the other day and the fuel was getting low next thing I noticed was the needle had dropped right down to nothing, I put in £40 of petrol but still nothing, any ideas very welcome.

    Thanks in advance

    Tim
     
  2. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,611
    The Brickyard
    Full Name:
    The Bad Guy
    Actualizer likes this.
  3. 550Tim

    550Tim Rookie

    Feb 11, 2013
    24
    Cheers errnie.

    I have checked the plug behind the gauge but that seems fine, Where is the panel I have to remove as looking under the car im not too sure what to remove!

    I wonder if the sender has had it as the gauge used to flicker all over the place when I picked it up from the dealer and they had it back to sort and put it down to an electrical plug issue. I have lost faith in the garage and they are 130 miles from me also, so I want to try and sort myself if possible. Is there any other plugs in between I can check?

    Thanks so much for your help ernie its great.
     
  4. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,611
    The Brickyard
    Full Name:
    The Bad Guy
    #4 ernie, Aug 9, 2013
    Last edited: Aug 9, 2013
    You will need to lift the rear of the car up so you can get access from underneath. It's on the bottom right side of the fuel tank. Between the engine and the passenger compartment.
     
  5. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,611
    The Brickyard
    Full Name:
    The Bad Guy
  6. 550Tim

    550Tim Rookie

    Feb 11, 2013
    24
    Got it ernie, the wires seem very stiff and brittle I will try and meter it by putting pins through the wires near the sender and then on the plug as it looks like the wires may be damaged as the plastic protector shield that covers them has worn away and i bet there is a break there.

    Let you know
     
  7. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,611
    The Brickyard
    Full Name:
    The Bad Guy
    Take some pics and post them while your at it. It'll help out the next guy that needs to tackle the same issue.
     

Share This Page