I need help..looking for a spare part | FerrariChat

I need help..looking for a spare part

Discussion in '360/430' started by yaserw, Nov 29, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. yaserw

    yaserw Karting

    Sep 17, 2011
    127
    Hi everone

    I am looking for this part, no one seem to have it..can anyone help me to source it

    Part # 180846 Waterroil Exhanger


    Thank You
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,649
    South East
    Full Name:
    Jimmie
  3. English Rebel

    English Rebel Formula 3

    Aug 13, 2013
    2,158
    Piedmont Area of NC
    Full Name:
    Alan
    Ricambi says that they are out of stock and on manufacturers back order with no date.
    Alan
     
  4. FerrariDublin

    FerrariDublin F1 Rookie

    Jun 14, 2009
    3,454
    Dublin, Ireland
    Full Name:
    Greg
    You might try from EuroSpares UK, they supplied mine with a minimum of fuss. Do also order the replacement washers for the oil line coolers as they're not really suitable for re-use. (#145192) Consider also replacement of the clamps for either end.
     
  5. yaserw

    yaserw Karting

    Sep 17, 2011
    127
    Thank you all for the help but still no luck to source one the dealer here say it might take till mid of next year to be available, I am trying with Eurospares to source one from Hong Kong but still waiting for confirmation , can anyone help me to find a second hand part

    Thank you
     
  6. English Rebel

    English Rebel Formula 3

    Aug 13, 2013
    2,158
    Piedmont Area of NC
    Full Name:
    Alan
    I wouldn't trust a used oil/water heat exchanger because if it leaks you will have one big mess on your hands. Is there some reason you are replacing it -- is it a preventive measure. If so more reason not to use a second hand one.
    Alan
     
  7. BrettC

    BrettC Formula 3

    Aug 13, 2012
    2,106
    Calif
    Full Name:
    Brett
    If you HAD TOO....I think the salvage yards in Rancho Cordova, CA might sell you one.
     
  8. yaserw

    yaserw Karting

    Sep 17, 2011
    127
    Thank you all for the tips, I manage to get a used one from CA hence as ferrari message new ones will not be available until March 2014, and I do need to replace mine hence it is already damaged.

    Today I got a message from one of the supplier saying that he manage to source a new one from the UK, i will call him to have it delivered to me.
     
  9. English Rebel

    English Rebel Formula 3

    Aug 13, 2013
    2,158
    Piedmont Area of NC
    Full Name:
    Alan
  10. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    16,488
    Charleston, SC
    Full Name:
    Curt
    If I had to replace mine I would get 8 intake gaskets with the new rubber before and aft teh intercooler and remove the intake plenum. From there its easy to replace it.
     
  11. English Rebel

    English Rebel Formula 3

    Aug 13, 2013
    2,158
    Piedmont Area of NC
    Full Name:
    Alan
    Curt
    Can that heat exchanger be replaced from below as it looks like it's just behind the water pump? I guess you may have to pull the alternator and/or the AC pump.
    Alan
     
  12. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    16,488
    Charleston, SC
    Full Name:
    Curt
    Doubt it. It lies in the valley between the two banks at the top of the engine. Maybe via the access hatch in the front of the engine.. maybe...
     
  13. mike01606

    mike01606 Formula Junior

    Feb 21, 2012
    794
    Cheshire UK
    Full Name:
    Mike M
    Daniel,

    Are they still manufactured by Setrab or unmarked now?.......

    I'd be interested to see if it is an improved version.

    Thanks......M
     
  14. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    This is an improved version -- actually designed by Daytona Auto in Toronto Canada.

    They are a wee bit longer than the originals (the rubber end caps still fit fine), and feel heavier.
     
  15. mike01606

    mike01606 Formula Junior

    Feb 21, 2012
    794
    Cheshire UK
    Full Name:
    Mike M
    Thanks Daniel........
     

Share This Page