Rocker Panel Removal | FerrariChat
Buy

Rocker Panel Removal

Discussion in '360/430' started by Fiorano57, Jan 26, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Fiorano57

    Fiorano57 Formula 3
    BANNED

    Dec 23, 2010
    1,689
    #1 Fiorano57, Jan 26, 2014
    Does anyone have experience with the above? Swapping mine out for some C/F pieces in about a month or so no rush. PITA or doable while car is on ground. My lift is a ramp type and my wife's Z8 is over it. Kevin
     
  2. anxpert

    anxpert Formula Junior

    Mar 4, 2008
    970
    Oceanside, CA
    Full Name:
    Enrique Mar
    #2 anxpert, Jan 26, 2014
    The ramp style lift will not be of any help, as you will have to remove the rear tires to gain access to the inner fender liners and the rocker(s) rear support nuts. In addition, the door striker panels have to be removed, so attention is needed as to not to close your doors, specially the drivers side due to the rear hatch release.

    You should have enough space with jack stands ( be safe ) !
     

Share This Page