Question related to 348s | FerrariChat

Question related to 348s

Discussion in '348/355' started by ceb39, May 6, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ceb39

    ceb39 Formula Junior

    Sep 17, 2012
    483
    San Francisco Area
    Full Name:
    Chuck B
    Some time in April there was a post related to 348s. Specially it described how to remove and lubricate the shafts (which are within tubes under the car) which are used to change gears. Can not remember whether it was on F Chat or elsewhere.

    Should have printed it out, but I knew I would not have any trouble finding it again. So much for depending on my memory.

    Thanks

    ceb39
     
  2. 348Jeff

    348Jeff Formula 3

    Oct 25, 2011
    1,547
    UK
    Full Name:
    Jeff
    You mean paul's video (Pnichollsan on fchat)

    https://www.youtube.com/watch?v=mIvAhIBVzBA


    Really good tutorial and I actually did this yesterday (but without a ramp).

    348 DIY "Restoration" - Page 149


    If I may I'd like to just a couple of things....

    1) In the video it mentions to apply the lubricant to where the cable goes thin which I di as per video. However, I noticed that after doing that you could get even more (as in extra not instead of) freeness of the cable by apply lubricant into the "cup" and wiggle in the cable up and down.

    2) If your struggling with that very inaccessible 8mm bolt to undo the spacer plate undo the 4 13mm bolts holding the bottom of the gearchange mechanism plus the 2 set screws holding the H gate inside and the mechanism will drop about 5mm making it much easier to do :)
     
  3. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,787
    Ontario, Canada
    Full Name:
    Mike
    Always check the "348 do it yourself " thread at the top of this forum
     
  4. ceb39

    ceb39 Formula Junior

    Sep 17, 2012
    483
    San Francisco Area
    Full Name:
    Chuck B
    Thank you, thank you, thank you.

    Forgot it was on You Tube.

    ceb39usa
     

Share This Page