Air Boxes over the Throttle Bodies...how do you get 'em out? | FerrariChat

Air Boxes over the Throttle Bodies...how do you get 'em out?

Discussion in '348/355' started by The Outcast, May 25, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. The Outcast

    The Outcast Formula 3

    Joined:
    Apr 19, 2011
    Messages:
    1,562
    Location:
    Royal Oak Michigan
    I need to change my Throttle Body/Airbox seals, because once the car gets hot, it causes some nasty little problems, and I can even hear the air leaking on occasion.

    Is it hard to get them out, or do they just pop off?
     
  2. AceMaster

    AceMaster Three Time F1 World Champ

    Joined:
    Feb 6, 2009
    Messages:
    34,789
    Location:
    Ontario, Canada
    Full Name:
    Mike
    What model
     
  3. Dino Chang

    Dino Chang Guest

    Joined:
    Dec 29, 2012
    Messages:
    772
    If its on a 355, around each throttle body tube there is a kind of jubilee clip, 8 of them. All these clips have to be loosened for you to simply pull the air box upwards.
    Be cautious however because inside each clip there are two half moon metal collets which surrounds the rubber tube seals that you want to replace. Some of the metal half moons can and will drop into the valley of the engine, so have a magnet at hand.
    Don't forget to pull of the various air box hoses before you take of the airboxs.
     
  4. Dave rocks

    Dave rocks F1 World Champ BANNED

    Joined:
    Nov 23, 2012
    Messages:
    16,047
    Location:
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    As another tip, when working in that area, I place a rag(s) on the top of the engine valley so that if I do drop something, the rags will catch the parts from falling into the abyss :D
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
  5. The Outcast

    The Outcast Formula 3

    Joined:
    Apr 19, 2011
    Messages:
    1,562
    Location:
    Royal Oak Michigan
    It's a 1999 F355 Berlinetta 6-speed.
     
  6. Dino Chang

    Dino Chang Guest

    Joined:
    Dec 29, 2012
    Messages:
    772
    Yea your welcome mate.
     
  7. The Outcast

    The Outcast Formula 3

    Joined:
    Apr 19, 2011
    Messages:
    1,562
    Location:
    Royal Oak Michigan
    Thanks!!!
     
  8. The Outcast

    The Outcast Formula 3

    Joined:
    Apr 19, 2011
    Messages:
    1,562
    Location:
    Royal Oak Michigan
    Dave...in your photo, do you have the coolant overflow tank removed? Thanks in advance Bud...
     
  9. Dave rocks

    Dave rocks F1 World Champ BANNED

    Joined:
    Nov 23, 2012
    Messages:
    16,047
    Location:
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Hey Dennis,

    No, it's not removed - just the mounting bolts are removed and it's proped up.
     
  10. The Outcast

    The Outcast Formula 3

    Joined:
    Apr 19, 2011
    Messages:
    1,562
    Location:
    Royal Oak Michigan
    That's good news...

    Thanks!
     
  11. bcwawright

    bcwawright F1 Veteran

    Joined:
    Jul 8, 2006
    Messages:
    5,234
    Location:
    Georgia
    Full Name:
    Bruce
    Last edited by a moderator: Sep 7, 2017
  12. Dave rocks

    Dave rocks F1 World Champ BANNED

    Joined:
    Nov 23, 2012
    Messages:
    16,047
    Location:
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Dennis, to be clear, I did not have my air boxes off in that photo. Only trying to show the rag to prevent parts from falling into the valley.
     
  13. The Outcast

    The Outcast Formula 3

    Joined:
    Apr 19, 2011
    Messages:
    1,562
    Location:
    Royal Oak Michigan
    Dave, Dino, Mike Bruce;

    I know...this gets said a lot around here, but I guess I'll just say "my own version":

    In the time it would have taken to have explained this over the phone to a service advisor and make an appointment...oh, wait a minute, it's Sunday...I got expert advice (with firsthand photos), a parts source, and an agreed-upon price for parts that likely will ship Tuesday and be here before the weekend.

    That's FChat, and that's The Brotherhood.

    Please plan on enjoying the first few rounds on me should I have the pleasure to meet you in person!
     
    Last edited: May 25, 2014

Share This Page