O-rings | FerrariChat

O-rings

Discussion in '308/328' started by lostbowl, Jul 20, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. lostbowl

    lostbowl Formula 3

    Apr 30, 2009
    1,246
    Michigan
    Full Name:
    Tom
    Superformance has excellant service and I received my frictopn disc in less than a week! I have since been trying to locate the three O-rings needed when replacing the bell housing. Can anyone give me the exact size of the three O-rings mating the bell housing to the block? I have several O-ring kits but I have not been able to match them. Living in the Great White North is an issue when trying to find parts for an F-car. cheers, lost

    PS our summer is almost over and I have put on only a couple hundred miles when The disc gave up
     
  2. klatu

    klatu Formula Junior

    Apr 13, 2009
    277
    San Diego
    Full Name:
    Rob Mckinney
    I ordered a kit, and the o rings were in it. I,m sure if you ask them they will send you just the rings.

    Klatu
     
  3. MNExotics

    MNExotics F1 Rookie
    BANNED

    Dec 13, 2010
    2,631
    Good Thunder
    Full Name:
    Ben Gruenzner
    #3 MNExotics, Jul 20, 2014
    Last edited: Jul 20, 2014
    Pm sent
    Did you replace the rear main seal while you were in there? I found a PVC end cap the worked great to drive mine straight and flush

    Glad you still have it my friend
     
  4. lostbowl

    lostbowl Formula 3

    Apr 30, 2009
    1,246
    Michigan
    Full Name:
    Tom
    The rear main showed no sign of leaking so I left it as is. The bell housing is so easy to access I would not be bothered if I had to pull it off again.
    thanks for the part numbers, Lost

    PS summer finally arrived so I hope to get her on the road today
     

Share This Page