Unscratchable Lever Bezel Labels for Dinos | Page 2 | FerrariChat
Buy

Unscratchable Lever Bezel Labels for Dinos

Discussion in '206/246' started by Verell, Jun 4, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,502
    Germany
    Full Name:
    Matthias
    #26 GermanDino, Feb 8, 2012
    correct Bob, between the seats in the middle console
    :)
     
  2. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,502
    Germany
    Full Name:
    Matthias
    #27 GermanDino, Feb 8, 2012
    same on my M-series #01406, but the right plate blank
    :)
     
  3. jvj

    jvj Rookie

    Sep 18, 2009
    48
    South Australia
    Full Name:
    Vince
    #28 jvj, Feb 14, 2012
    Last edited by a moderator: Sep 7, 2017
    Quote:

    can we have the chassis no. please, I have never seen this one before...
    but I have seen a blank plate on some M-series...
    can please all M-series owner post pictures of their levers with chassis no`s please
    interesting stuff
    :)
    regards Matthias


    #01616 levers here (UK right hand drive GT/M collected from factory 8 March 71)
    regards, Vince
    Image Unavailable, Please Login
     
  4. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,024
    Groton, MA
    Full Name:
    Verell Boaen
    #29 Verell, Feb 15, 2012
    Last edited: Feb 15, 2012
    Just received this from my customer:

    So he has the correct lever combination & when I get the O-down arrow plates I can supply a complete set of correct unscratchable lever label plates for his car!

    My thanks to all of you for your advise & assistance on helping with this issue!

    Hmm, is it possible the blank plate is a O&arrow plate with the icons worn off?
     
  5. Mark Shannon

    Mark Shannon Formula 3
    Silver Subscribed

    Dec 28, 2003
    1,242
    Surrey, UK
    #30 Mark Shannon, Feb 16, 2012
    Last edited by a moderator: Sep 7, 2017
  6. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,502
    Germany
    Full Name:
    Matthias
    #31 GermanDino, Feb 16, 2012
    yes, it seems it`s original on early E-series only.....
    crazy Italians....
     
  7. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,024
    Groton, MA
    Full Name:
    Verell Boaen
    #32 Verell, Mar 5, 2012
    Last edited by a moderator: Sep 7, 2017
    The O/down arrow label plates just came in!!!
    Unobtainium can now supply two more label plate sets, see photos below.

    Ordering instructions are in my catalog, see: www.UnobtainiumSupply.com.

    1st photo: Lever Label Plate Set, Unscratchable, Dinos, Euro w/2 heaters (1-temp & 1-choke w/red & blue dots, 2-DEF)

    2nd photo: Lever Label Plate Set, Unscratchable, Dinos, Euro w/2 heaters (1-O&down arrow, 1-temp & 1-choke w/red & blue dots, 1-DEF)
    (Color miss-match is because I photoshopped the 1st photo to paste in a picture of the new O&down arrow label)
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  8. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,024
    Groton, MA
    Full Name:
    Verell Boaen
    #33 Verell, May 19, 2013
    cross posted from Technical Q&A:

    solly,
    Yes, I still have what you need for your series 246 GTS, series E (1974).

    I have a limited supply of Unbreakable (solid aluminum) chrome plated bezels in stock. while they last, they are only $75.69 each, $300/set of 4!!! (3 for dash, + 1 for CHOKE on console).

    I also supply: Lever Label Plate Set, Unscratchable, Dinos (1-TEMP w/red & blue dots, 2-DEF,1-CHOKE) 246 Dino $95.00. Sold as complete sets to ensure full color match.

    To order click on my name by this post and select: [Send eMAIL to Verell]

    Sorry I haven't worked on a 246's bezels. However, from looking at the SPC it looks like it's either reach up under, or pull the dash. Can anyone help with this?
     
  9. DinoDriver

    DinoDriver Formula Junior

    Mar 14, 2005
    537
    Leesburg, VA
    Full Name:
    Bill Ebert
    #34 DinoDriver, May 23, 2013
    Solly, I've replaced all my slide controls including the choke. For the 3 on the dash, go in from the bottom. No need to pull the dash. You may need to remove the voltage regulator for better access . . . I vaguely remember that helping but not sure. I did remove the passenger seat so I could lay down a blanket in the passenger footwell for comfort as you will be on your back for awhile. It helps to have small hands, small tools and a lot of patience. BUT, it's well worth the effort!
    Bill
     
  10. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,864
    Denmark
    Full Name:
    Peter H
    #35 pshoejberg, Sep 10, 2013
    Last edited by a moderator: Sep 7, 2017
    Hi Matthias and all other experts in interior,

    I noticed that I have one blank lever bezel in my early L series #504 and wondered if that is due to wear and tear or if it is purpose made from factory. I just ordered a set of bezels from Verell, but he had no blank bezels in stock since he's not sure if these blanks are period correct. What is your opinion; should it be blank or is it a worn "0 to arrow" label?

    Regards

    Peter
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  11. dgt

    dgt Formula 3
    Owner Silver Subscribed

    Jan 14, 2011
    1,292
    Northeast, USA & Oz
    Full Name:
    Andrew
    #36 dgt, Sep 10, 2013
    Looks to be worn off, should be first one on left in post #32 (DEF; 0<-><-).
    I did a quick check on 4 L's and they are all the same.
    Carefully check for any signs of remaining marks before declaring it a blank.
     
  12. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,864
    Denmark
    Full Name:
    Peter H
    #37 pshoejberg, Sep 10, 2013
    Thanks a lot!
    Close inspection revealed slight traces of the "DEF" marks on the left side of the label. Verell was on the right track. Case closed.

    Peter
     
  13. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,502
    Germany
    Full Name:
    Matthias
    #38 GermanDino, Sep 10, 2013
    I would agree
     
  14. rosso dino

    rosso dino Karting

    Mar 5, 2009
    195
    #39 rosso dino, Sep 10, 2013
    Last edited by a moderator: Sep 7, 2017
  15. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,024
    Groton, MA
    Full Name:
    Verell Boaen
    #40 Verell, Sep 11, 2013
    Glad you are getting the correct set.

    You may wear the satin clear topcoat off the Unscratchable lever labels you're receiving, but you won't wear the lettering & icons off, they are under a layer of clear synthetic sapphire!! W/o the clear coating the labels can be cleaned with steel wool & pumice without damage!!!
     
  16. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    #41 synchro, Aug 6, 2014
    There are two bezels for the Dino in the catalog and I'm unsure which is correct for a 1972 246 GTS Euro version, any help possible?
    http://www.unobtainiumsupply.com/attachments/File/UnobtainiumSupply_Product_List.PDF


    60044302-BEZL Bezel, Lever Chrome Unbreakable Al (See our matching Unscratchable Label Plate Sets) 308GTS/B Can be used on: Dinos, 400, Daytona, others 2 oz 8 oz/4 $129.00/bezel $516.00/4 bezels


    60548100-BEZL Bezel, Lever Early Chrome Unbreakable Al, w/groove on tab, 1 hole w/rounded ends (See our matching Unscratchable Label Plate Sets) 206/246, 365 GTB4, Boxer, others 2 oz 8 oz/4 $75.69/bezel NOTE: Supply limited


    Thank you
     
  17. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,024
    Groton, MA
    Full Name:
    Verell Boaen
    #42 Verell, Aug 6, 2014
    Last edited by a moderator: Sep 7, 2017
    60548100-BEZL should be the correct one, they have the groove on the lever mounting tab, and the small, rounded end hole for the lever mounting pin. See pictures below.

    You're lucky, I still have some in stock.

    BTW, the 60044302-BEZL is sold out & I'm having trouble finding a shop that can/will make them at a reasonable price. It can be used on a Dino, but takes a bit of work as it doesn't have the groove on the tab's back & the mounting hole may need some rework. Also, the corners of the top are more rounded than the original Dino part.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
Page 2 of 2

Share This Page