How can i remove the instrument nacelle? | FerrariChat

How can i remove the instrument nacelle?

Discussion in '308/328' started by Albert-LP, Dec 29, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    8,187
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    #1 Albert-LP, Dec 29, 2014
    Last edited by a moderator: Sep 7, 2017
    i would like to remove the instrument nacelle, as i want to put new vinyl on it: is that a difficult thing or can i do it by myself? is there a discussion here with some pictures or figures where i can learn how to do it?

    I'm talking of the nacelle (part. 4) and instrument panel (part. 1)

    Thank you very much for your help

    ciao
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert
    Not so bad. Remove first steering wheel. Then instrument panel. Disconnect electrical connectors. Then four nuts, one in each corner need to come off and that's it.
     
  3. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert
    Many threads on panel removal.
     
  4. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    8,187
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    Thanks you very much, but i cannot find them: the "search" function is something i still do not handle very well.

    I will try a new search.

    ciao
     
  5. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert

    1- remove five or six screws to remove steering wheel
    2- using dental floss remove warning lights in four corners of panel
    3- using screw driver remove four screws accessed through the light holes.
    4- pull panel out. Screws will be on the shelf.
     
  6. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    8,187
    around Modena, Italy
    Full Name:
    Alberto Mantovani
  7. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert

    Once the panel is out there are four nuts, one in each corner of the binnacle. They are very small. I used a needle nose pliers to reach the ones closest to the firewall because my hands are big. Work slow take your time. Awkward position but doable. Good luck !
     
  8. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    8,187
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    Thank you very much again: i will try to do it.

    ciao
     
  9. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert

    Tip- If a GTS take off targa top.
     
  10. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    8,187
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    unfortunately it's my 308 GTB!

    ciao
     
  11. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert

    Take plenty towels!
     
  12. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert

    Another tip. I replaced the vinyl with identical leather. It GREATLY reduced reflected light in the windshield. I highly recommend this. It looks the same but acts very different.
     
  13. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    8,187
    around Modena, Italy
    Full Name:
    Alberto Mantovani

Share This Page