FS: Custom Sig Sauer P229 E2 9mm Gray Guns Competition | FerrariChat

FS: Custom Sig Sauer P229 E2 9mm Gray Guns Competition

Discussion in 'Ad Archives' started by Robb, Feb 27, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Robb

    Robb Moderator Moderator Lifetime Rossa Owner

    Joined:
    Feb 28, 2004
    Messages:
    14,456
    Location:
    Tucson, Arizona, USA
    Full Name:
    Robb
    I had a custom CZ-75 made for me by master gunsmiths and I like it so much that I am now making a switch to more CZ's. The custom Sigs need a new home.

    I have a beautiful Sig Sauer P229 E2 Nitron Finish 9mm DA/SA with the de-cocker for sale. It is in fantastic condition with only 300 rounds through it going to the range twice in a case. Never carried in a holster. I am the original owner. Serial # AHU 01221. Have a look at the photos. You’ll notice it is a safe queen and well taken care of. It is the perfect compact service weapon for your CCW.

    The pistol includes the E2 slim grips installed, their plastic removal tool, instructions, lube, two 15 round magazines, and cable lock with matching plastic box. I am happy to email you more detailed photos.

    Price is $ 999.00

    Shipped from my FFL holder to yours for actual shipping cost and preference. This is likely US Postal Priority Mail with 2-day service for around $20. I will pay my FFL his transfer fees. You will be responsible for any fees with your FFL. I accept a bank check, US Postal Money Order or “discrete” paypal purchase with 3% fee added for credit cards there. Email me with any questions at [email protected] and thanks for your interest.

    The sig trigger out of the box is normally not very smooth or light so you are likely to go to a gunsmith to refine the smoothness and weight of the pull – especially if you are serious about getting the most accuracy out of the pistol and want your Sig to be at its best. Otherwise you would have just bought a Glock.

    This pistol has returned from Gray Guns in Oregon – who are the master gunsmiths for Sig Sauer and custom work. They are famous for their work and it took 60 days waiting in the cue because they are so sought after. You can find them at Grayguns by Bruce Gray | SIG Sauer, HK, 1911 Custom Firearm Gunsmith

    They installed a brand new front Tru-Glow tritium green fiber optic night sights with bright green dot on the front with green glow dots rear. They also put the pistol through their most expensive “Enhanced Leverage Competition Package” at a cost of $450 which they are NO LONGER OFFERING due to their limited time and resources. But it is the best you can get. So if you always wanted one of their specials – get one of the last right here. Here is what they say about the work:

    “This is our premier competition-only package and includes all the obsessively performed smoothing, tuning, springing and short reset work of our basic Competition Short Reset Package (CSR) with the addition of several features. The heart of the Grayguns ELCP is a specially engineered version of our P-Series Precision Intermediate Trigger (P-SPIT), which permits us to dramatically reduce the DA and SA pulls without compromising factory sear engagements, safety system values, or ignition reliability. 6.5-7lb DA and 2.5-3lb SA pull weights are typical, depending on the model.

    The P-SPIT’s internal fitted over-travel stop is not externally visible to comply with production-division rules, and the SA pre-travel stop reduces the free slack takeup in single action mode by approximately 50 percent. The trigger face has been carefully designed for perfect comfort and control. This package also eliminates free-slack take up at the beginning of the DA stroke. The hammer will start moving as soon as the trigger is pressed and the entire DA pull will be dead-smooth, ultra-light and free of stacking and objectionable overt-travel.
    This package will only be performed on guns with standard length solid (non-MIM) triggers. If your gun has a short or MIM trigger we can usually supply the required barstock standard length trigger. If you are worried about trigger reach we can modify the standard length trigger into an intermediate trigger as described in the additional options section.”
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
  2. Robb

    Robb Moderator Moderator Lifetime Rossa Owner

    Joined:
    Feb 28, 2004
    Messages:
    14,456
    Location:
    Tucson, Arizona, USA
    Full Name:
    Robb
    Last edited by a moderator: Sep 7, 2017
  3. TRScotty

    TRScotty F1 Rookie Owner

    Joined:
    Oct 12, 2006
    Messages:
    2,505
    Location:
    Tyler, Texas
    Full Name:
    Scotty
    How much?
     
  4. Robb

    Robb Moderator Moderator Lifetime Rossa Owner

    Joined:
    Feb 28, 2004
    Messages:
    14,456
    Location:
    Tucson, Arizona, USA
    Full Name:
    Robb
    Sorry I left that out Scotty.

    $ 999.00 plus actual shipping cost of your choice.

    Price now added in the original post with an edit.

    Robb
     
    Last edited: Feb 27, 2015

Share This Page