Fabspeed Cat... ? | FerrariChat
Buy

Fabspeed Cat... ?

Discussion in '308/328' started by mike996, Sep 4, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mike996

    mike996 F1 Veteran

    Jun 14, 2008
    6,912
    Full Name:
    Mike 996
    #1 mike996, Sep 4, 2015
    I was just doing some checking and found that the Fabspeed Cat converter for a 328 is 2x the price of he Hyperflow Cat converter. They look identical. What the heck's up with that?

    ALSO, I notice that Ricambi doesn't seem to carry Hyperflow any more. What's up with THAT?

    This checking is in preparation for the slow down light microprocessor that (hopefully) is in the works. I have the OEM cat but would prefer to leave it in the box in the garage so I can charge the next owner more for my "all-original" car! ;)
     
  2. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,407
    Houston, Texas
    Full Name:
    Bubba
    #2 BigTex, Sep 4, 2015
    ANSA handles a line of low restriction catalysts unit.

    I know nothing about them.
    :D :D :D
     
  3. cmt6891

    cmt6891 Formula 3

    Feb 25, 2008
    1,340
    Encino, Ca
    Full Name:
    Carl T
    #3 cmt6891, Sep 4, 2015
    What Happened ??? They were less than $500 just 4 months ago ! $1495 is a crazy price.
     
  4. mike996

    mike996 F1 Veteran

    Jun 14, 2008
    6,912
    Full Name:
    Mike 996
    #4 mike996, Sep 5, 2015
    Thanks, I was thinking they were around $500 from what I remembered a while back but when I went to the site and saw the current price I figured I had misremembered. Glad to see I had not!

    Obviously that price is a total non-starter when the Hyperflow is 1/2 that. Of course, there are other Cat options that are less than 1/2 of the Hyperflow price as well though they probably aren't "bolt-in" without some mods - but easy enough for any muff shop.

    Maybe Fabspeed decided they didn't REALLY want to be in the Ferrari 3x8 aftermarket cat business so they adjusted the price so that they wouldn't really expect to sell any. From the appearance I suspect that the Fabspeed and HF cat are from the same supplier, just like a Die Hard battery and an Interstate battery of the same spec are the same battery made by Johnson Controls and re-branded.
     
  5. Bradley

    Bradley F1 Rookie

    Nov 23, 2006
    2,831
    Lakewood, Colorado
    Full Name:
    Bradley
    #5 Bradley, Sep 5, 2015
    Mike996, I don't think that FabSpeed and Hyper-Flow are from the same supplier, although I can see why you'd suspect that.

    FabSpeeds were HALF the cost of HyperFlows when I got mine a few months ago.
     
  6. mike996

    mike996 F1 Veteran

    Jun 14, 2008
    6,912
    Full Name:
    Mike 996
    #6 mike996, Sep 6, 2015
    They may not be from the same supplier but from the pics, they look identical - I realize that doesn't mean they are. I have never seen a Fabspeed cat in person; I purchased/installed a HF cat on my 328 when I first bought it, pulling the OEM Cat, which was in perfect condition and didn't need replacing as it turned out. So I'm quite familiar with the HF cat. I sold it to a fellow F chatter when my slow-down system went south in 2009 and I purchased/installed the straight pipe which has been on the car since then.

    I'm fine with any brand Cat that will fit since there is no functional difference between modern cats as long as they are the correct size for the engine's output. But the HF (and the Fabspeed), with their nice chrome finish, sure are pretty! ;) That's probably a couple hundred bucks right there! :)
     
  7. mike996

    mike996 F1 Veteran

    Jun 14, 2008
    6,912
    Full Name:
    Mike 996
    #7 mike996, Sep 6, 2015
    Heck, here's one for 52 bucks! But I don't see the fitting for the Thermocouple...

    Some chrome plating and we could sell it for $250 as a "HyperSpeed" or a "FabFlow" :) :)

    1986 Ferrari 328 GTS Catalytic Converter
     

Share This Page