2v cam locks | FerrariChat

2v cam locks

Discussion in '308/328' started by SteveG75, Sep 8, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SteveG75

    SteveG75 Formula Junior

    Joined:
    Nov 23, 2010
    Messages:
    380
    Location:
    FL
    Full Name:
    Stephen
    Anybody have a set of Verell's 2 valve cam locks that they are willing to let me borrow? Looks like I need to get the cam belts done while waiting for the car to sell.

    Thanks,
    Steve
     
    SteveG75, Sep 8, 2015
    #1
  2. waymar

    waymar Formula 3

    Joined:
    Sep 2, 2008
    Messages:
    1,354
    Location:
    Northeast, PA - USA
    Full Name:
    Wayne Martin
    I used a hockey puck cut in half then reverse (looks like hour glass)and drill a hole through and use a long wing nut. Place it in between the sprocket pulleys. Works very well.
     
    waymar, Sep 8, 2015
    #2
  3. Meister

    Meister F1 Veteran Silver Subscribed

    Joined:
    Apr 27, 2001
    Messages:
    5,516
    Location:
    Duluth, MN
    Full Name:
    The Meister
    yes plenty of DIY/make you own tools out there from the hockey puck to wood to that white plastic they make cutting boards out of. Do a google image search for 308 cam lock tool and you'll get plenty of ideas. You don't need to have any special tools to make the lock either, can probably get by with a hand held drill and hand held jig saw.
     
    Meister, Sep 8, 2015
    #3

Share This Page