Garage floors | Page 2 | FerrariChat

Garage floors

Discussion in 'Ferrari Discussion (not model specific)' started by cls, Sep 4, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kurtflies12

    kurtflies12 Karting

    Aug 13, 2015
    64
    Tx
    Be very careful with vinyl type. I had black and white put down in my garage and everyone said it would be fine. Well what they did know was that if you left a car parked for more than 24 hours,,,, there would be a chemical reaction between the rubber tire and the white tile,,,and it would leave a brown mark on the white tiles that will not come out. Tried everything , bleach , degreaser ect. I had epoxy put down at my hangar and it is fine. But it was 15K for 8000sq'. We need to come up with a better solution .
     
  2. kurtflies12

    kurtflies12 Karting

    Aug 13, 2015
    64
    Tx
    Wet epoxy is unbelievably slippery ...even with no slip shoes.
     
  3. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #28 bundas, Sep 21, 2015
    Last edited by a moderator: Sep 7, 2017
    Concrete, polished to 900 grit 2,000sq ft. $8,500. 4 men over a ten day period. Including cure time. I nave not water tested it. But it has a texture feel
    Image Unavailable, Please Login
     

Share This Page