where i can get one of these buggers?

My L-series is different to Ian's, 4 holes on RHS, 1 on the LHS.
It's the same as at least one other L but I'm not sure this is an exact science
My E is 1 screw short compared to Iains.
Image Unavailable, Please Login

 

RHS
Image Unavailable, Please Login

 

even until today Ferrari is setting rivet holes by hand..... ;-)

 

I found Five in 05702 and am fairly certain it is original to the car, although the access door hinge has been repaired and the Foredit washer bag hangers are black
Image Unavailable, Please Login

 

I've got 5 just like synchro in the exact same locations as synchro on my original batchboard.

 

I bought a repro at Rutlands 10+ years ago and five holes were already drilled in it.

 

I shouldn't have said "in the exact same locations". I should have said in similar locations as the holes were most likely hand drilled.

The repro batchboard I got from FAF many years ago did not have predrilled holes. My neighbor was able to line up the original holes in my Dino body and drill pilot holes in the repro batchboard to line up perfectly. I was able to use the original screws.

Synchro, were your Rutlands repro predrilled holes close to your original holes?