where i can get one of these buggers? | Page 2 | FerrariChat

where i can get one of these buggers?

Discussion in '206/246' started by philt68, Jan 14, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. dgt

    dgt Formula 3 Owner Silver Subscribed

    Joined:
    Jan 14, 2011
    Messages:
    1,292
    Location:
    Northeast, USA & Oz
    Full Name:
    Andrew
    My L-series is different to Ian's, 4 holes on RHS, 1 on the LHS.
    It's the same as at least one other L but I'm not sure this is an exact science :)
    My E is 1 screw short compared to Iains.
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    dgt, Oct 30, 2015
    #26
  2. dgt

    dgt Formula 3 Owner Silver Subscribed

    Joined:
    Jan 14, 2011
    Messages:
    1,292
    Location:
    Northeast, USA & Oz
    Full Name:
    Andrew
    Last edited by a moderator: Sep 7, 2017
    dgt, Oct 30, 2015
    #27
  3. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,504
    Location:
    Germany
    Full Name:
    Matthias
    even until today Ferrari is setting rivet holes by hand..... ;-)
     
    GermanDino, Oct 31, 2015
    #28
  4. synchro

    synchro F1 Veteran

    Joined:
    Feb 14, 2005
    Messages:
    9,294
    Location:
    CHNDLR
    Full Name:
    Scott
    I found Five in 05702 and am fairly certain it is original to the car, although the access door hinge has been repaired and the Foredit washer bag hangers are black
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    synchro, Nov 2, 2015
    #29
  5. Dino246gts

    Dino246gts Formula Junior Silver Subscribed

    Joined:
    Jun 6, 2006
    Messages:
    436
    I've got 5 just like synchro in the exact same locations as synchro on my original batchboard.
     
    Dino246gts, Nov 5, 2015
    #30
  6. synchro

    synchro F1 Veteran

    Joined:
    Feb 14, 2005
    Messages:
    9,294
    Location:
    CHNDLR
    Full Name:
    Scott
    I bought a repro at Rutlands 10+ years ago and five holes were already drilled in it.
     
    synchro, Nov 10, 2015
    #31
  7. Dino246gts

    Dino246gts Formula Junior Silver Subscribed

    Joined:
    Jun 6, 2006
    Messages:
    436
    I shouldn't have said "in the exact same locations". I should have said in similar locations as the holes were most likely hand drilled.

    The repro batchboard I got from FAF many years ago did not have predrilled holes. My neighbor was able to line up the original holes in my Dino body and drill pilot holes in the repro batchboard to line up perfectly. I was able to use the original screws.

    Synchro, were your Rutlands repro predrilled holes close to your original holes?
     
    Dino246gts, Nov 13, 2015
    #32
Page 2 of 2

Share This Page