18" Challenge Wheel Set | FerrariChat

18" Challenge Wheel Set

Discussion in 'Ad Archives' started by puckf16, Nov 2, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 2
  1. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Ferrari 360 BBS 18” Silver Challenge Wheel Set (lightly used)
    Ferrari 360 BBS valve stems (lightly used)

    18 x 8 Fronts
    18 x 10.5 Rears

    Extremely light weight and rare.

    Asking $4500 or OBO including shipping to US/Canada
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    puckf16, Nov 2, 2015
    #1
  2. Robb

    Robb Moderator Moderator Lifetime Rossa Owner

    Joined:
    Feb 28, 2004
    Messages:
    14,465
    Location:
    Tucson, Arizona, USA
    Full Name:
    Robb
    Those look very nice. Those should go quickly. GLWS.

    Robb
     
    Robb, Nov 2, 2015
    #2
  3. mathewr

    mathewr F1 Rookie Sponsor Rossa Subscribed

    Joined:
    Dec 7, 2011
    Messages:
    2,939
    Location:
    Deep in the Heart of Texas
    Full Name:
    Ferrari Wheel Guru
    These should go quick,... well done.
     
    mathewr, Nov 2, 2015
    #3
  4. madturk

    madturk Formula 3 BANNED

    Joined:
    Nov 2, 2003
    Messages:
    1,508
    Location:
    Williston, ND
    Full Name:
    Seyhan Kilincci
    nice wheels,, glws
     
    madturk, Nov 2, 2015
    #4
  5. JohnsonsMedia

    JohnsonsMedia Formula Junior

    Joined:
    Sep 14, 2009
    Messages:
    254
    Location:
    AZ
    hi, do you happen to know the offset of the wheels? or quicker to the point if they will fit an f355?
     
    JohnsonsMedia, Nov 2, 2015
    #5
  6. Robb

    Robb Moderator Moderator Lifetime Rossa Owner

    Joined:
    Feb 28, 2004
    Messages:
    14,465
    Location:
    Tucson, Arizona, USA
    Full Name:
    Robb
    They will fit an F355 but will require milling off metal on the rears...

    Robb

     
    Robb, Nov 3, 2015
    #6
  7. Enzojr

    Enzojr F1 World Champ

    Joined:
    Dec 12, 2013
    Messages:
    14,001
    Location:
    West of PDX
    Full Name:
    Tomy
    The PO of my 355 installed 360 Modulars on my car.
    The paperwork says 15mm was shaved off the rear wheels.
    Not certain if the challenge wheels are the same size.
     
    Enzojr, Nov 3, 2015
    #7
  8. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,341
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Tomy- They are wider. 360 five spokes and modulars are 7.5" F, 10" R.

    Ferrari OEM Wheel Sizes


    5 X 114.3 mm Bolt Pattern

    612

    Five Spoke F 18”, R 19”, 5 X 114.3 mm
    Front 8J X 18 ET 43.5 mm , R 10J X 19 ET 51.1 mm
    Five Spoke Modulars 19”, 5 X 114.3 mm
    Front 8J X 19 ET 43.5 mm, Rear 10J X 19 ET 51.1 mm
    Challenge Monolithic 20”, 5 X 114.3 mm
    Front 8J X 20 ET 43.5 mm, Rear 10J X 20 ET 51.1 mm

    599/HGTE/SA Aperta

    Five Spoke F 19”, R 20”, 5 X 114.3 mm
    Front 8J X 19 ET 43.5 mm, Rear 11J X 20 ET 63.8 mm
    Challenge Monolithic 20”, 5 X 114.3 mm
    Front 8J X 20 ET 43.5 mm, Rear 11J X 20 ET 63.8 mm
    HGTE/SA Aperta Five Spoke 20”, 5 X 114.3 mm
    Front 8.5J X 20 ET 40 mm, Rear 11J X 20 ET 63.8 mm

    599 GTO

    Five V/Ten Spoke 20”, 5 X 114.3 mm
    Front 9.5J x 20” ET 38 mm, Rear 11.5J x 20” ET 63 mm

    California

    Pentagram Forged 19”, 5 X 114.3 mm.
    Front 8J X 19 ET 44 mm, Rear 10J X 19 ET 52.5 mm
    V Spoke Forged 20”, 5 X 114.3 mm
    Front 8J X 20 ET 44 mm, Rear 10J X 20 ET 52.5 mm

    458

    Five/Ten Spoke 20”, 5 X 114.3 mm
    Front 8.5J X 20 ET 46.5mm, Rear 10.5J X 20 ET 58.5 mm

    458 Speciale

    Five Spoke 20”, 5 X 114.3 mm
    Front 9J X 20 ET 44.7 mm, Rear 11J X 20 ET 48.4 mm

    FF

    Five Spoke 20”, 5 X 114.3 mm
    Front 8.5J X 20 ET 46.5, Rear 10.5J X 20 ET 53.4 mm

    F12

    Five/Ten Spoke 20”, 5 X 114.3 mm
    Front 9.5J X 20 ET 48.4 mm, Rear 11.5J X 20 ET 71.6 mm

    488

    Five/Ten Spoke 20”, 5 X 114.3 mm
    Front 9J X 20 ET TBD, Rear 11J X 20 ET TBD




    5 X 108 mm Bolt Pattern

    Testarossa

    Five Spoke 16”, 5 X 108 mm
    Front 8J x 16 ET 34.2 mm, Rear 10J x 16 ET 59.6 mm

    512 TR/F512M

    Five Spoke 18”, 5 X 108 mm
    Front 8J x 18 ET 46 mm, Rear 10.5J X 18 ET 81.75 mm

    348

    Five Spoke 17” Early, 5 X 108 mm
    Front 7.5J X 17 ET 49 mm, Rear 9J X 17 ET 68 mm
    Five Spoke 17” Late, 5 X 108 mm
    Front 7.5J X 17 ET 49 mm, Rear 9J X 17 ET 43.05 mm

    355

    Five Spoke 18”, 5 X 108 mm
    Front 7.5J X 18 ET 32 mm, Rear 10J X 18 ET 77.9 mm

    456 GT/456M

    Five Spoke 17”, 5 X 108 mm
    Front 8.5J X 17 ET 50 mm, Rear 10J X 17 ET 24.6mm

    360

    Five Spoke and Modular 18”, 5 X 108 mm
    Front 7.5J X 18 ET 31.5 mm, Rear 10J X 18 ET 38.95 mm

    360 Challenge

    Challenge Monolithic 18”, 5 X 108 mm
    Front 8J X 18 ET 31.5 mm, Rear 10.5J X 18 ET 39.95 mm

    360 Challenge Stradale

    Challenge Monolithic 19”, 5 X 108 mm
    Front 7.5J X 19 ET 31.5 mm, Rear 10J X 19 ET 39 mm

    550/575M/Superamerica

    550/575M Five Spoke/Modular 18”, 5 X 108 mm
    Front 8.5J X 18 ET 43.65 mm, Rear 10.5J X 18 ET 32 mm
    575M/575 Superamerica Five Spoke Modular 19”, 5 X 108 mm
    Front 8.5J X 19 ET 43.6 mm, Rear 10.5J X 19 ET 32 mm

    F430

    Five (Ten) Spoke, Challenge Monolithic, Scuderia Style 19”, 5 X 108 mm
    Front 7.5J X 19 ET 31.5 mm, Rear 10J X 19 ET 39 mm

    F430 Challenge

    Challenge Monolithic, Center Lock
    Front 8J X 19 H2 Center Lock, Rear 10.5J X 19 H2 Center Lock

    Scuderia/16M

    10 Spoke, Five Spoke 19”, 5 X 108 mm
    Front 8J X 19 ET 31.5 mm, Rear 10J X 19 ET 39 mm
     
    tazandjan, Nov 3, 2015
    #8
  9. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    The wheel bolt pattern will fit the 355. Offset is different and would run closer to the outside of the fender. I can do a quick measurement from the wheel flange to the outside. Stock wheels sit pretty far inside the fender. Measure from your hub to the fender lip and that will let you see where these wheels would run. Happy to do the measurements if interested. Thanks, Eric
     
    puckf16, Nov 3, 2015
    #9
  10. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Thanks for the words on the wheels. They are very nice but are not going to work out as planned for my project. Unfortunately I need to have custom wheels made.
     
    puckf16, Nov 3, 2015
    #10
  11. RedTaxi

    RedTaxi F1 Rookie Silver Subscribed

    Joined:
    Mar 1, 2012
    Messages:
    3,364
    Location:
    New Zealand
    Full Name:
    Glen
    Had these on my 360. Great upgrade. GLWS.
     
    RedTaxi, Nov 3, 2015
    #11
  12. cfensty

    cfensty Formula 3 Silver Subscribed

    Joined:
    Jan 1, 2008
    Messages:
    1,109
    Location:
    South Carolina
    Love mine also
     
    cfensty, Nov 3, 2015
    #12
  13. jmillard308

    jmillard308 F1 Veteran Owner

    Joined:
    May 29, 2003
    Messages:
    6,688
    Location:
    Perth West Oz
    Full Name:
    John Millard
    e-m sent
     
    jmillard308, Nov 3, 2015
    #13
  14. 97 Spider

    97 Spider Formula 3

    Joined:
    Dec 15, 2012
    Messages:
    2,241
    Location:
    Texas
    Full Name:
    Brian
    Awesome info. Thanks Terry.
     
    97 Spider, Nov 3, 2015
    #14
  15. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Had a buyer but last minute did not work out (buyer decided to go a different direction). Wheels are boxed and ready to ship.
     
    puckf16, Nov 8, 2015
    #15
  16. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Last edited by a moderator: Sep 7, 2017
    puckf16, Nov 9, 2015
    #16
  17. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Last edited by a moderator: Sep 7, 2017
    puckf16, Nov 9, 2015
    #17
  18. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Last edited by a moderator: Sep 7, 2017
    puckf16, Nov 9, 2015
    #18
  19. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Last edited by a moderator: Sep 7, 2017
    puckf16, Nov 9, 2015
    #19
  20. 24000rpm

    24000rpm F1 Rookie

    Joined:
    Aug 31, 2012
    Messages:
    4,653
    Location:
    China and California
    possible to take just 1 rear wheel? or maybe 2 rear wheels?
     
    24000rpm, Nov 9, 2015
    #20
  21. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Sorry but no. Will only sell as a set.
     
    puckf16, Nov 9, 2015
    #21
  22. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Still for sale.
     
    puckf16, Nov 15, 2015
    #22
  23. murrayjp

    murrayjp Rookie

    Joined:
    Mar 24, 2007
    Messages:
    3
    WHAT is THE WEIGHT ON THESE WHEELS ? WILL THEY FIT STOCK 360 MODENA?
     
    murrayjp, Nov 16, 2015
    #23
  24. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Front weigh 20lbs, rear weigh 23lbs. Yes, they will fit a stock 360 Modena.
     
    puckf16, Nov 16, 2015
    #24
  25. puckf16

    puckf16 Rookie

    Joined:
    May 23, 2009
    Messages:
    49
    Location:
    Severna Park, MD
    Full Name:
    Eric
    Bump
     
    puckf16, Nov 20, 2015
    #25
Page 1 of 2

Share This Page