3D printed window switch bezels?

here is a quick print of the 348 one, this took about 30 min. The switches fit perfect and it snapped back on to the door, want to adjust the radius in the corners to be a lot closer. Not bad for my first off. I sent it to the printer to run tonight in high quality, will run for 3 hrs. Want to compare the difference.
Image Unavailable, Please Login
Image Unavailable, Please Login

 

That is cool.

 

Great work!

 

Looks good.
Yes I received your piece. I will see if I can get it scanned this weekend. I hope to have it printed by the end of next week. Printer is running non stop at this time for a couple of big proto type projects.

 

You are doing a great job and I don't mean to rain on that but what can you do to improve resolution or post process to have these parts resemble injection molded parts like OEM?

They are just too coarse as the native 3D print. Again, the work is very nice just would like to see something that represents OEM

 

excellent

 

you have a viable business here

 

There is a company called GT car parts who make these in aluminum. Phone 623 780 220. Part no 62158800A. Cost $60. Website gtcp.com although it's not listed on their site.

I got one recently.

Hope that helps.

 

Old and new. My understanding from the research I did was that it's the same part for both cars, but others should confirm. New one is power coated black.
Image Unavailable, Please Login

 

Here is the back. Most of the little tabs were broken on mine.
Image Unavailable, Please Login

 

Hi Mark

Thanks for sending me your part. Had a little time yesterday to scan and model up the bezel you sent, came out pretty good. There area a couple of flows in the scan that I might have to fix but ran out of time. I should have time next week to print a sample up and check sizes. Also we have a new SLA printer coming in the next couple of weeks which should give me an almost perfect part. Will keep you guys posted.
Image Unavailable, Please Login

 

That is really cool. Can't wait to see the printed part.

 

Looks fantastic! I'll buy one for my 348 as soon as you are ready to sell them.

Thanks,
Erik

 

very excited, I'll be buying one from you for sure.

 

+1

 

2MMUCH

Do you think you could print the seat pot gear/clutch as one piece to eliminate the failure of the spider seat pots? Definitely a marketable part and looks like you have the ability to do it.
Image Unavailable, Please Login

 

So years later is there a source for the 1992 Ferrari 348 TS drivers door switch fixing plate? I see from the thread someone was working on this in January of 2016. Thanks, David

 

There was this, and there's a banned guy who you can find on facebook named Nicholas, he's in france and does low pressure urethane molded ones. I have one, they're nice. PM me.

sjd

 

At the risk of resurrecting a seriously old thread, I don't suppose there's an STL file for the 348 switch panel kicking about? happy to make a donation for it, so I can print my own over here in the UK. Thx