I have a found a BOSS adaptor made by MOMO for F355 with airbag and Horn. http://www.rallynuts.com/user/products/large/MK7310_600.jpg Will this steering wheel fit this adaptor? I mean this 6 bolts are the same on all steering wheels or not ? http://www.ompracing.it/media/catalog/product/cache/2/image/9df78eab33525d08d6e5fb8d27136e95/O/D/OD1990_11_1.jpg Thanks
Be aware that the Momo adaptor requires some drilling (outlines for the required holes are scribed into the unit) to fit the 355.
You are talking about this ? SWS-355B - 355 Spacer by: Hill Engineering - Hill Engineering Ferrari You also have an airbag version ? Will the OMP wheel fits this Adaptor?
Yep thats the one. Worked like a charm without any modification, direct on to a MOMO steering wheel. And yes it should work with your OPM steering wheel as the hole alignment is the same as the another poster mentioned.
Thanks guys But does this Hill engineering adaptor have a airbag wire to which I can attach my airbag cable ? Don't want to have a airbag light on dashboard.
No. For the light you have to bridge the two holes of the cable with a 3,3 ohm resistor, so to let the passenger's airbag to work. Infact, without reading the driver's airbag existence the entire system won't work. Here on the site you'll find other topics like this.