Hi Guys, I want to fill in the missing tools in my Tool Kit, and want to make sure I'm getting the proper ones for my L model 1) Hammer: Book calls out 1000gr. What is the diameter of the head and overall length? 2) Plug Wrench: Book says USAG What is the overall length? 3) Straight Screw Driver: What is the manufacturer and overall length? The book calls out Cacciavite 120mm 4) Philips Screw Driver: Who is the manufacturer and overall length. Book calls out viti da 5 a 9 5) Carb Tool: # 84114 Is this the same as the ones I see all over e-bay? 6) Pliers: Manufacturer and overall length 7) Reflector: the picture in the book shows it as Bellax (?) is this in a plastic sleeve or in a canvas pouch? are these common to Alfa? Any help would be greatly appreciated. Thanks, Steve
Hi Steve, Here is some more information that I indexed you might find useful... Hammer: http://www.ferrarichat.com/forum/206-246/403848-206-246-l-wheel-hammers.html Pliers: http://www.ferrarichat.com/forum/206-246/14957-dino-246-gt-tool-kit-pliers.html http://www.ferrarichat.com/forum/206-246/104306-pliers-246gts-tool-kit.html http://www.ferrarichat.com/forum/vintage-thru-365-gtc4-sponsored-redline-restorations/49475-ferrari-plier-time.html Triangle: 246GTS Safety Triangle - what is correct? - FerrariChat.com General info: 2 SIRCODIN SPANNERS/WRENCHES IN A DINO TOOLKIT AND RELATED MATTERS - FerrariChat.com Who on FerrariChat said the Dino Tool kits are up to $10,000.00 USD ? - FerrariChat.com GUIDE Tool Kits - Factory Supplied Dataarts Manual - FerrariChat.com Dino Toolkits And Manual Sets By Chassis Number - FerrariChat.com Toolkit - FerrariChat.com Looking for 12/14 Wrench, Sparkplug wrench - FerrariChat.com Who on FerrariChat said the Dino Tool kits are up to $10,000.00 USD ? - FerrariChat.com http://www.ferrarichat.com/forum/206-246/314484-repro-tool-kit-inquiry.html http://www.ferrarichat.com/forum/206-246/48334-246-dino-toolkit-ebay.html Also note the toolkit changed slightly over L-series production; * 3 types of Jack were used. * 2 types of pliers were probably used (cad and later zinc) * 2 types of tool bag (with or without creme liner) For the triangle, Bellux is correct and I've seen the plain dimpled case only on some original L, the case with Bellux printed on it may be earlier (206) and the embossed vintage car on the case is early E-series timeframe. Do you have the correct jack and tool bags? Regards, Andrew
i have the correct pliers and triangle if anyone is interested. email me. can i send pix to a moderator to post pix here?
Send me a pm with your phone #, a good time to call, and we can go on it step by step. Meanwhile, subscribe. Regards, Alberto
Hi Andrew, Thank you for the information. I do have the original jack, Jack bag and tool bag. Thanks, Steve