Changed the Silentbloc at the transmission end of the shift linkage. It was a heavy press fit in the part extending out of the engine/trans Made the shown tool to push the old bloc out and the new one in Job takes about 30 minutes! Put the transmission in third gear and worked in the space between the engine and frame crossmember Image Unavailable, Please Login
I guess if you can do it with two sockets...I waisted my (and your) time! To answer your question, the only "critical"dimensions are those for tube C You key off the dimensions of the Silentbloc My replacement had an OD of .630 so I made C with an OD of .585 The OD of the center tube of the Silentbloc was .390 so I made the hole in C .395 Hope this helps you
