toolkit for 308 | Page 6 | FerrariChat

toolkit for 308

Discussion in '308/328' started by EMILIO, Sep 10, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,408
    Houston, Texas
    Full Name:
    Bubba
    Correct.

    Early cars had the "T" bar pug wrench, for the larger spark plugs.
     
  2. FrannyB

    FrannyB Formula Junior

    May 20, 2014
    293
    Arvada, CO
    #127 FrannyB, Nov 16, 2015
    Last edited by a moderator: Sep 7, 2017
    Hi All,

    This is what came with our '85 QV Euro. I was told these were originals and at the time looked proper enough... Funny the pliers look correct, but blue. No markings at all. All the wenches are combo with Ferrari on one side except for the 14mm with is a closed end and says UTEMA. The spark plug wrench looks correct-ish and is 14mm. The snaps on the bag don't have any writing on them, but the female does have the ridges. May be missing one screw driver? They are dark, translucent red, but with no markings at all.

    Is this an older replica? The bag feels heavy and old. Quality is ok. Looks just like the jack bag except it has leather straps. Looks like both were rumbling around the back a bit.

    Thanks,

    Franny
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  3. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,408
    Houston, Texas
    Full Name:
    Bubba
    Yes,those are correct.

    The one "off brand" is required by the changed approach,to the spark plugs.
    The closed end wrench fits the hex shank.

    I have not personally seen blue pliers, but would not discount that they DID come with the bag!

    nerofer??
    blue pliers??

    I say "legit".......
     
  4. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,408
    Houston, Texas
    Full Name:
    Bubba
    You are missing the smaller flat blade screwdriver, to have all four.
     
  5. i-velocita

    i-velocita F1 Rookie
    BANNED

    Sep 9, 2006
    2,520
    Colorado
    Full Name:
    James
    Nice looking kit. The plier grip color and shape look wrong to me. Could have been a substitution at some point, even from the factory.
     
  6. Grim Reaper tr

    Grim Reaper tr Karting

    Oct 6, 2014
    135
    The toolkit pictured is correct.

    The Blue handle pliers were supplied by the factory for all QV's and Mondial QVs produced in 1984....the 1983 and 1985 year cars had red handle pliers....another Ferrari production "quirk"!

    Grim.
     
  7. nerofer

    nerofer F1 World Champ

    Mar 26, 2011
    12,085
    FRANCE
    Yes Alan, blue pliers are "legit", although:
    - my knowledge of toolkits isn't as extended as the information provided by "Grim reaper Tr", and I wouldn't have known that it was a "year of production" peculiarity; one learn something everyday, and I will go to bed slightly (very slightly) less dumb today.
    - I would have agreed with "i-velocita" that the shape of the plastic handles looks slightly odd - to me -, especially the "finger guards", but again I submit to "Grim reaper Tr".

    Wrenches are very probably Utema, even if not marked; anybody reading the thread has a set of "Utema" wrenches, with all wrenches marked "Utema"?

    Late models QV had screwdrivers either "plain", without the white "Ferrari" script on the handle, or with the white "Ferrari" script on the handle.
    The small flat blade screwdriver is missig from the toolkit, unfortunately it is one of the most difficult to find...

    Rgds
     
  8. piezo

    piezo Formula 3

    May 27, 2011
    1,533
    Hong Kong
    Full Name:
    Steven

    The snaps, "Fiocchi *italy*" is on the back of the male stud, you can see only one of them inside the pouch near the 17/16mm wrench. The pouches vary in their stitching and snap positions.
    Image Unavailable, Please Login
    Blue handled pliers... That colour and handle I haven't seen before but this darker blue one that looks very similar to the orange-red one. And I think the darker blue ones were from later replacement kits?
    Image Unavailable, Please Login
    There cannot be a standard though, too many unknowns about tool kits.
     
  9. brooks1257

    brooks1257 Rookie

    Sep 28, 2014
    31
    Just received my reproduction bag, fantastic quality and I can recommend them to fellow chatters.

    Thank you

    Dave
     
  10. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    8,187
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    I'm happy to hear you liked the tool bag, Dave.

    Thank you for the positive feedback: I did it as I needed a tool roll bag for one of my cars, so I did it in the best way possible.


    ciao
     
  11. NoGoSlow

    NoGoSlow Formula Junior
    Silver Subscribed

    Jul 29, 2014
    641
    Republic of Texas
    Full Name:
    Mark Jacks
    My Alberto Especiale tool bag arrived yesterday. Very nice.

    Thanks, Alberto!
     
  12. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    11,283
    CT
    Full Name:
    John Kreskovsky
    #137 johnk..., Nov 24, 2015
    Last edited by a moderator: Sep 7, 2017
  13. 308Pedro

    308Pedro Rookie

    Jul 23, 2015
    30
    Hi! I've been looking for months for an original Leather pouch for my 1977 308 Gtb. Any clue where can I find one?
    Thank you



    Enviado do meu iPhone usando o Tapatalk
     
  14. nerofer

    nerofer F1 World Champ

    Mar 26, 2011
    12,085
    FRANCE
    Pedro,

    Are you looking for:
    - the tool roll (= the pouch for the tools)? Well, in that case it is not made in leather, but vinyl...
    - the owner's manual pouch? For the car books (owner's manual, warranty card, network directory...). In that case, unless you are already absolutely sure on which type of pouch you are looking for, you should have a look at the posts dedicated to that topic.

    Rgds
     
  15. piezo

    piezo Formula 3

    May 27, 2011
    1,533
    Hong Kong
    Full Name:
    Steven

    Since you posted in a thread about toolkit, I assume you are looking for the roll/pouch for tool kit. Jeff aka Fairview listed one just yesterday in the ad section.

    308 tool roll, empty
    http://www.ferrarichat.com/forum/showthread.php?t=513624

    It's vinyl as nerofer said...
     
  16. nerofer

    nerofer F1 World Champ

    Mar 26, 2011
    12,085
    FRANCE
    Yep; leather would be very nice, but that would not be OEM.
    After all, these cars are only "fast FIATS", so leather would be out of character...

    Rgds
     
  17. nerofer

    nerofer F1 World Champ

    Mar 26, 2011
    12,085
    FRANCE
    Not complete, missing the emergency window crank; early 1980 screwdrivers type, polytools wrenches: so would be best on an early production injected car, say 1981.

    Rgds
     
  18. piezo

    piezo Formula 3

    May 27, 2011
    1,533
    Hong Kong
    Full Name:
    Steven

    Literally it is complete according to the owner's manual or the spare parts catalogue. Only place I found the window crank info is the owner's manual section for door controls but not in the tool kit section for both documents ;)
     
  19. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,408
    Houston, Texas
    Full Name:
    Bubba
    Not sure where it supposed to be stored, but the Emergency Crank is definately part of "complete" tools.

    IMO

    I usually found it added to the soft tool roll.

    Damn, at $3K I should have considered my tools a better investment that the car!!
     
  20. Sbb0113

    Sbb0113 Rookie

    Feb 14, 2016
    3
    I am interested in the tool kit, if price is right. Brad, Plano Tx 972-333-4252
     
  21. i-velocita

    i-velocita F1 Rookie
    BANNED

    Sep 9, 2006
    2,520
    Colorado
    Full Name:
    James
    +1
     
  22. 455Fosbery

    455Fosbery Karting

    Oct 3, 2013
    212
    This is exactly what I have in my '84 308 GTS QV (US). As such, there are at least half a dozen that have stated this as what they see as OE for their respective 308s.

    I posted this on the other toolkit thread:

    http://www.ferrarichat.com/forum/308-328-sponsored-yellow-compass-group/505898-unofficial-308-tool-kit-specifications-18.html

    Late to the thread: Seeing the prices, I immediately rushed out and removed the tool and jack kits from the boot. These are basically 'mint', so I wiped them down with lambskin coated with "RIG" (which is the best protectant I know of and is used on $100K double rifles!). So, here's the deal...

    - 1984 (June if memory serves) 308 QV US Model
    - Tool Kit exactly like Jeff's = 'Blue' handled pliers, 14mm spanner (wrench) by 'Utema' with all others marked "Ferrari". My take on the 14mm spanner is that it is the only one of the set that has a closed end... May explain the difference in manufacturer...
    - Window tool missing the plastic bit at the end (DANG, now where did THAT get to)
    - Spark Plug tool has the insulating insert

    The thread had me worried that my set was mismatched until reading the later posts...

    Agreed that getting into 'cardboard sparkplug box' details would likely be grounds for having us all committed to the funny farm, but it is exactly this kind of painstaking attention to detail that differentiates us... right? Both of mine are Bosch W 6 DS without boxes by the way and I have a total of four belts (likely the plugs and additional belts were put there by Norwood, as he usually went 'above and beyond' when servicing)...

    Many thanks for all contributors to a fabulous thread...

    Best,

    John.
     
  23. 308Pedro

    308Pedro Rookie

    Jul 23, 2015
    30
    I´m looking for the Brown leather pouch/wallet that came with the service book, manual and dealers directory.
    I apologize posting on this thread, sorry but didn´t know there as a specific one.
    Thank you anyway for your help and interest.
    Regards,
    Pedro
     

Share This Page