348 - 348 Parts Thread | Page 22 | FerrariChat

348 348 Parts Thread

Discussion in '348/355' started by plugzit, Mar 1, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ernie

    ernie Two Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Nov 19, 2001
    Messages:
    22,637
    Location:
    The Brickyard
    Full Name:
    The Bad Guy
  2. aec

    aec Karting

    Joined:
    Jul 28, 2011
    Messages:
    138
    Location:
    Weston, MA
    The cut-off valve made by Pierburg in Germany (Ferrari part #147390) appears to be exactly the same as the Saab part #4228011 used for the Saab 900 and Saab 9000. The Saab part appears to be readily available online for around $70 (new). Has anyone used this Saab part?
     
  3. aec

    aec Karting

    Joined:
    Jul 28, 2011
    Messages:
    138
    Location:
    Weston, MA
    Last edited by a moderator: Sep 7, 2017
  4. vjlax18

    vjlax18 Formula Junior Silver Subscribed

    Joined:
    May 12, 2014
    Messages:
    687
    Location:
    Nottingham, MD
    Full Name:
    John
  5. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,249
    Location:
    Mount Isa, Australia
    Full Name:
    Pap
    Awesome!! That looks to be indentical! And cheap too. :)

    Just double check there is the diode under that insulation for the power wire.

    You can see it under the heat shrink on your old one, double check the new one has it in place.

    When I replaced my a/c compressor last year it never had the diode in place, so we soldered one in.

    Thanks for sharing, much appreciated.
     
  6. dahveedem

    dahveedem Formula 3

    Joined:
    Mar 12, 2012
    Messages:
    1,603
    Location:
    Maryland
    Full Name:
    David

    It looks like Bosch 0280160738 has been discontinued. Anyone know if Bosch makes another model that's a 3.8 bar? Standard makes a PR298 that should work, but I'd rather stick with Bosch if possible.
     
  7. dahveedem

    dahveedem Formula 3

    Joined:
    Mar 12, 2012
    Messages:
    1,603
    Location:
    Maryland
    Full Name:
    David
    FYI.. confirmed the Bosch part 0280160738 has been discontinued.

    PR298 is the 3.8 bar option available - for now.
     
  8. OldBill

    OldBill Rookie

    Joined:
    Nov 18, 2016
    Messages:
    1
    Location:
    London
    Full Name:
    Bill Hanley
  9. albagtp

    albagtp Karting

    Joined:
    Sep 23, 2014
    Messages:
    57
    Location:
    Beach City
    Full Name:
    Bryan
    Since I originally posted this information I felt it necessary to update it. I purchased a rebuilt pump from them, It was not as advertised. They kept stalling me to make it right but never did for over a year. I returned the pump and to this day have not received a refund and lost a good core pump in the process as well. Unfortunately after doing more research it seems i'm not the only one taken by this guy, he also goes by max071492 on ebay. Beware of this guys unsatisfactory business practices.
     
  10. AceMaster

    AceMaster Three Time F1 World Champ

    Joined:
    Feb 6, 2009
    Messages:
    34,797
    Location:
    Ontario, Canada
    Full Name:
    Mike
  11. vjlax18

    vjlax18 Formula Junior Silver Subscribed

    Joined:
    May 12, 2014
    Messages:
    687
    Location:
    Nottingham, MD
    Full Name:
    John
  12. SoCal1

    SoCal1 F1 Veteran Owner

    Joined:
    Jun 14, 2011
    Messages:
    8,637
    Location:
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
  13. AceMaster

    AceMaster Three Time F1 World Champ

    Joined:
    Feb 6, 2009
    Messages:
    34,797
    Location:
    Ontario, Canada
    Full Name:
    Mike
  14. rustybits

    rustybits F1 Rookie Professional Ferrari Technician

    Joined:
    Jan 28, 2007
    Messages:
    2,509
    Location:
    Somewhere, anywhere
    Full Name:
    Eddie B
    Air filter, Ferrari part number 155871, is from a fiat Croma. Fram part number CA10049.
     
  15. FSM348

    FSM348 Formula Junior

    Joined:
    Feb 13, 2017
    Messages:
    469
    Location:
    Midwest
    Full Name:
    Dan Smith
    TB Shaft Seals

    I'm in the process of restoring my 348 and after powdercoating the throttle bodies I realized replacement throttle shaft seals on the TB were necessary. After a crazy amount of searching a little shop which happened to be local to me just so happened to have perfect sized replacements. 8mm x 12mm x 3mm rubber seals. Also they are only a couple bucks each!

    These seals fit both the throttle bodies and the intake manifold butterfly shaft seals.

    Metric Seals
    Westfield, Indiana

    metricsealsinc.com

    part number S 8 x 12 x 3 WOA

    https://www.metricsealsinc.com/single-lip-springless/022044-s-8-x-12-x-3-wao


    SPECS:

    Single Lip Spring Less Oil Seal

    BAOF, VC, WAO, INA, VG


    Specs:

    Radial shaft seal with rubber covered O.D. And sealing lip without spring.


    Material:

    NBR (Natural Rubber), Plain Steel insert.

    Max Temperature: -40°C/-40°F – 100°C/ 212°F

    Max Surface Speed: 6 m/s

    8mm ID x 12mm OD x 3mm


    Application:

    Grease

    Simple sealing element for ancillary use; to seal against grease; as an additional seal against light to medium dust and dirt.
     
  16. marc556

    marc556 Formula Junior Silver Subscribed

    Joined:
    Jul 15, 2007
    Messages:
    590
    Location:
    Wiltz (Lux)
    Full Name:
    Marc Foyen
    Do you know where I can find a PDF or XLS file about all these infos ?
     
  17. m.stojanovic

    m.stojanovic F1 Rookie Silver Subscribed

    Joined:
    Dec 22, 2011
    Messages:
    3,327
    Location:
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    Here's one I have.
     

    Attached Files:

  18. marc556

    marc556 Formula Junior Silver Subscribed

    Joined:
    Jul 15, 2007
    Messages:
    590
    Location:
    Wiltz (Lux)
    Full Name:
    Marc Foyen
    Tank you so much
     
  19. Koenig1

    Koenig1 Formula Junior

    Joined:
    Aug 25, 2016
    Messages:
    328
    Location:
    Ottawa ON
    Full Name:
    Sandy
  20. AceMaster

    AceMaster Three Time F1 World Champ

    Joined:
    Feb 6, 2009
    Messages:
    34,797
    Location:
    Ontario, Canada
    Full Name:
    Mike
    Here is what I have
     

    Attached Files:

    ernie likes this.
  21. User-C3

    User-C3 Karting

    Joined:
    Aug 29, 2018
    Messages:
    240
    Location:
    Detroit
    Full Name:
    Trevor
    ABS brake pump

    The jaguar xj6 uses the same setup and the electric motor, pressure switch, and accumulator are all the same as the Ferrari. The electric motor bolts right up, and even uses the same plug. The only difference between the two units is the accumulator is located on the opposite side of the jaguar pump housing pointing it straight up if used on the Ferrari and not fitting under the closeout panel. Complete units can be had for $200
     
    seabass23 likes this.
  22. Ferrarium

    Ferrarium F1 Veteran Sponsor Rossa Subscribed

    Joined:
    Jul 28, 2018
    Messages:
    5,728
    Location:
    Central NJ
    Full Name:
    Eric
  23. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
  24. User-C3

    User-C3 Karting

    Joined:
    Aug 29, 2018
    Messages:
    240
    Location:
    Detroit
    Full Name:
    Trevor
    seabass23 likes this.
  25. Clarence Cazimero

    Clarence Cazimero Rookie

    Joined:
    Sep 17, 2019
    Messages:
    25
    Location:
    New York
    Full Name:
    Clarence Cazimero

Share This Page