F355 oil filter wrench

Post us up a picture

 

That's fairly cheap. Is it plastic or metal?

 

Does it have the horse on it like mine?

 

Thanks for posting this. I just bought one to,,great deal

 

Yes thanks might have to get another as a spare.

 

The only issue I have seen with those is the spot welds can be weak between the cap and insert...and they separate. Someone posted that this happened to them, and they welded the snot out of it, to prevent it from happening again.

I'm pretty happy with the Hill Engineering one.

 

Just ordered one. First oil change planned in the next week or 2.

 

You can get it on Amazon for L4.70

Sealey VS7006.V2-15 Oil Filter Cap Wrench, 18 Flutes, Dia 86 mm: Amazon.co.uk: Car & Motorbike

But I've been using one of these for 50 years. Works fine on the 308 and 355 too!
Image Unavailable, Please Login

 

But does this wrench have a ferrari emblem on it ?is it made of titanium ?

How do you torque the filter to the correct spec as stated by the wsm using this , ugh ,common tool?

You are a hack , the wheels are going to fall off your car , i hope for safety sake the are no children nearby when your car explodes

 

Hey John,

I love the fact that the 355 filter is in a nice place and points down to drain the oil out

But (at least on a 5.2), side access is not great and I torque mine to spec

(yes, no torque wrench shown in this photo - just pre tightening)
Image Unavailable, Please Login

 

Does anyone else here have pictures of themselves tightening their oil filter ?

 

+1
works great on the ferrari, SUV and sport bike.

 

(but no horsey )

 

Here is a reenactment of me tightening mine.
Image Unavailable, Please Login

 

lol , no red Ferrari rubber glove with a horsey on it ?

I feel so left out ,I sold my Ferrari , so heres one of me putting gas in my Yukon

Things to note here, nozzle is completely inserted according to wsm procedure , all my electronic devices are switched off, and I did tighten the cap to till it clicked as per wsm spec.
Image Unavailable, Please Login

 

That's how I do it. My wrist clicks at the proper torque.

 

What a strange thread

 

Apparently you missed the wsm procedure to place the cap in the gas door retainer as to not scratch the paint. You get a D- better luck next time.

 

I will look at the gm performance website to see if there is a tool to accomplish that task properly, thank you kindly foraking me aware of my error, lol

 

Remember if you are filling the Turbo you place the little rubber cap tender through the clip on the fuel door.

 

Thnx , i'll look at that tomorrow, i was wondering , letting it hang on that one seems kinda sloppy.

Never thought about it , it hangs down so far it only hits the tire , lol