TR hood struts

Steve -

We have them available in stock here: 61571600 HOOD STRUT - Ricambi America, Inc.

 

Steve,
A quick search here,
http://www.ferrarichat.com/forum/boxers-tr-m/433818-any-tricks-front-hood-hinges.html

Post #10
Stabilus SG402012 got positive reviews with minimal mods to install.
Go to Autozone.

Take note if they will work on your year.

I have NAPA, P/N 819-5573 on mine but required brass bushings.
From this thread, http://www.ferrarichat.com/forum/boxers-tr-m/308361-front-hood-gas-struts.html


I'll keep looking at other threads.

 

Glad you liked the book. The Florida days were special...
Things good with me.
Busy at work.
TR sleeping in basement waiting for a major.
Two project cars in the Shop.

Did you get the paint taken care of on yours?

 

Send your old ones to StrutWise to be re-gassed, about $40 each, keep your original Ferrari struts and their markings.

StrutWise sells,repairs,refurnbishes,custom designs gas struts in US,Canada,worldwide.

http://www.ferrarichat.com/forum/mondial/516845-best-options-hood-struts.html
Alden

 

Sachs Stabilus #sg437003,
I picked up a set from below link last year.
Already failing, but lucky they have a lifetime warranty.

Sachs sg437003 Gas Charged Hood Lift Support | Ferrari

 

4 years ago I put Strong Arm Lift Support F4025 struts (on AdvancedAutoParts's web site), they've been flawless.

Whichever you put in, be very careful with the pins securing the struts, they are very (very very!) close the headlight housing and if you're not careful you could scratch them badly!

 

Just buy a couple of these. I have replaced front and rear three times with OEM and aftermarket and none of them last.

Buy Lisle Universal Lift Support Clamp 44870 at Advance Auto Parts

 

For what it's worth, I haven't had any problems with the Stabilus components, and I've had the front bonnet open a lot in the past 2 years.

In a side note, what are the suggestions for the rear bonnet? My rear bonnet doesnt stay up when cold now.

 

I hear it's pretty cold around Klamtucky in the winter...

 

Concur with Stabilus SG402012--I replaced my struts with these 5 years ago and no signs of getting weak (and I have the hood open frequently). This will last and do a great job.

 

I had my TR hood struts replaces cheap in town here in PHX. Message me if interested and I'll find the supplier.

 

Mondial trunk struts work well and last a very long time. Mine are 6 or so years old and work like the day I installed them. Unlike the aftermarket struts they fit properly too.

 

I replaced mine with new Stabilus and hardly any better than the ones I removed that were fitted from new. Not happy

P

 

Phil, I'd be very surprised if they were this P/N: SG402012. Can you confirm what you installed?

 

I had mine regassed, they worked for about six months, then they started getting stuck, squeaking, was too difficult to lift the bonnet , so I replaced them with original ones.

 

I'll make a note next time I am in the garage. They should be correct as they came from Maranello

p

 

If you are going that route, piece of fuel line of the correct size, split along one side, works fine and will not damage the smooth part of the strut like the screw down portion of that clamp will. Some folks use a piece of PVC, sliced and cut to the proper length too, but that might scratch the paint.
Alden

 

I just exchanged the above for a set of Strongarm #4025 + refund.
These shocks are great. I can even have my front hood up half way and it will stay there.
Excellent customer service at (High Quality Automotive | Marine | Industrial Lift Supports)

 

I picked up set of Strong Arms recently at a local auto parts store but I found the cartridge was a bit too thick to allow a proper mount on the upper pivot point next to the headlight. The only way to have installed these is upside down which shortens the life expectancy.

I went with another pair of Stabilus from liftsupportdepot.com which offers a lifetime warranty. Can't beat that.

 

Or you can put in a pair of 60563300 and not have to have them recharged every few years. I have been installing these a long time and have yet to replace a single one. I have had a set in our TR for years.

 

Posted reference to cross-reference thread.