Steering Rack Bushing | FerrariChat
Buy

Steering Rack Bushing

Discussion in '308/328' started by shashi27, Apr 13, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. shashi27

    shashi27 Formula Junior

    Jan 7, 2006
    988
    Long Valley, NJ
    Full Name:
    Shashi
    #1 shashi27, Apr 13, 2016
    I'm having the 928 SC installed (finally!) on my Qv by a reputable shop in NJ. During the course of looking it over they found a worn bushing in the steering rack causing quite a bit of slop. The long and short of it is the bushing they need to replace "is inside the rack and keeps the rod from the pinion centered in the tube." They were not aware of any vendor who sells the bushing but I thought I would give it a try with the crew here before I had them fabricate it. Any thoughts?
     
  2. finnerty

    finnerty F1 World Champ

    May 18, 2004
    10,406
    #2 finnerty, Apr 13, 2016
  3. David Lind

    David Lind Formula 3

    Nov 19, 2008
    2,248
    Full Name:
    David Lind
    #3 David Lind, Apr 13, 2016
    The bushing for the Pantera can be adapted for use in a Mondial manual rack, which I believe is the same as the 328's. It's only about $40, & it's made of brass (not POS plastic which was the original design). PM me if you need details.
     
  4. shashi27

    shashi27 Formula Junior

    Jan 7, 2006
    988
    Long Valley, NJ
    Full Name:
    Shashi
    #4 shashi27, Apr 13, 2016
    Thanks for the quick replies. I shot them over a picture of the bush from Superformance.

    I also have a Pantera so maybe I should take it from there. ;-)
     

Share This Page