TR Clutch | FerrariChat
Buy

TR Clutch

Discussion in 'Technical Q&A' started by louiefox, Jul 7, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. louiefox

    louiefox Rookie

    Nov 12, 2014
    3
    California
    Full Name:
    Tony Malucchi
    #1 louiefox, Jul 7, 2016
    1986 TR Original owner 21,000 factory miles experiencing some clutch slippage in 4th & 5th gear above 3500rpm. Any adjustments to check or is new clutch the only option.
     
  2. Chief20123

    Chief20123 Karting

    Dec 22, 2012
    169
    Melbourne,Australia
    Full Name:
    Fred
    #2 Chief20123, Jul 7, 2016
    Last edited by a moderator: Sep 7, 2017
    try changing the 6 shims to thinner size. This might do the trick. but eventually the clutch needs changing.(This can be completed in half hour, without taking the clutch and pressure plate out)
    Image Unavailable, Please Login
     
  3. ozziindaus

    ozziindaus F1 Veteran

    Aug 16, 2012
    9,799
    Detroit
    Full Name:
    Sam
    #3 ozziindaus, Jul 7, 2016
    I'd say it has more to do with the plates not sliding completely on the spline shaft due to dirt and corrosion or just a worn clutch. I'd post these issues in the Boxer/TR section for a wider audience.
     

Share This Page