246 L Air Ducting | FerrariChat

246 L Air Ducting

Discussion in '206/246' started by sranderson, Aug 1, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sranderson

    sranderson Formula Junior

    Nov 15, 2003
    286
    Full Name:
    SRA
    Hi Guys,

    I am going to run new air ducts on my L model. Just so I understand correctly:

    The right side has a duct tube from the heater box to the blower motor. The blower motor is mounted front right forward of the inner fender shield. There is no duct attached to the intake side of it.

    The right side has a duct tube that runs from the foot well duct to the small screened round grill to the right of the main grill.

    The left side has a duct tube that runs from the foot well duct to the small screened round grill to the left of the main grill.

    (Left side has no motor)

    on another note, the blower motor assy is made by Smiths. Is that complete unit used on any other English car?

    Thanks,

    Steve
     
  2. dgt

    dgt Formula 3
    Owner Silver Subscribed

    Jan 14, 2011
    1,283
    Northeast, USA & Oz
    Full Name:
    Andrew
    Steve,
    I think that's all correct.
    Ashley Hinton makes the Smiths fan units if you need one, they are the same. I bought a case from him off eBay and it's good.
    Ashley Hinton - Heater Units
    Large ducts from Moss motors IIRC.
    regards, Andrew
     
  3. sranderson

    sranderson Formula Junior

    Nov 15, 2003
    286
    Full Name:
    SRA

Share This Page