348 problems and fixes | Page 13 | FerrariChat
Buy

348 problems and fixes

Discussion in '348/355' started by jford10014, Oct 5, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 13 of 23
  1. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #301 jford10014, Apr 17, 2016
    Last edited by a moderator: Sep 7, 2017
    These pictures show the left drivers side changed outside the right still has the old bulbs. The pictures don't really do it justice. The reverse light is brilliant white and the tail lights super red. This picture is in the dark with no flash.
    Image Unavailable, Please Login
     
  2. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #302 jford10014, Apr 17, 2016
    Last edited by a moderator: Sep 7, 2017
  3. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #303 jford10014, Apr 17, 2016
    Last edited by a moderator: Sep 7, 2017
  4. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #304 jford10014, Apr 17, 2016
    Last edited by a moderator: Sep 7, 2017
  5. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #305 jford10014, Apr 17, 2016
    Last edited by a moderator: Sep 7, 2017
  6. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #306 jford10014, Apr 17, 2016
    Last edited by a moderator: Sep 7, 2017
    Results came out really nice. Not sure the pics show the difference but super shiny black. I also put some on the targa roof and really transformed it !
    Image Unavailable, Please Login
     
  7. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #307 jford10014, Apr 17, 2016
    Last edited by a moderator: Sep 7, 2017
  8. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #308 jford10014, Apr 17, 2016
    Last edited by a moderator: Sep 7, 2017
  9. ///Mike

    ///Mike F1 Veteran

    Dec 11, 2003
    6,097
    Bugtussle
    #309 ///Mike, Apr 17, 2016
    Have you tested the new reverse lights in the real world? I'm curious if they provide noticably better light when reversing. Could you post the exact lamps you got for those of us who might want to try them? TIA.
     
  10. John_K_348

    John_K_348 F1 Rookie

    Sep 20, 2013
    2,757
    Boston, MA
    Full Name:
    John E. Kenney
    #310 John_K_348, Apr 20, 2016
    Brilliant work sir JFord. Thou art a royal stooge! :D
     
  11. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #311 jford10014, May 1, 2016
    Last edited by a moderator: Sep 7, 2017
  12. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #312 jford10014, May 1, 2016
    Last edited by a moderator: Sep 7, 2017
  13. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #313 jford10014, Aug 3, 2016
    So I have been enjoying the driving season this summer, and put many miles on the car. I have a couple of problems however.

    a) Car starts first time when cold, but when hot doesn't start well. Motor turns over and over before it "catches". sometimes you can hear poping. I'm guessing unburnt fuel hitting hot exhuast.

    b) car doesn't run smooth at idle (when hot). Revs tend to go up and down

    c) sometimes car stalls when putting the clutch in, or crawling in traffic.

    d) occasional CEL on the 1-4 bank

    I pulled the engine code, and got 1212. On my348.com it says it's either the O2 sensor or the MAF. Decided to buy some new O2 sensors and install

    I also, last winter, bought 4 new relays. This was from a post from Jeff where he had some success changing out the fuel pump and injector relays.
     
  14. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #314 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  15. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #315 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  16. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #316 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  17. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #317 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  18. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #318 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  19. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #319 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  20. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #320 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  21. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #321 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
    The reason you remove the air box is because the sensors plug in underneath the air box

    I bought a handy O2sensor socket to remove mine.
    Image Unavailable, Please Login
     
  22. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #322 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
    However it turn out to be totally useless. I couldn't get it to grip the sensor.

    An alternative way of doing this is to jack the car, remove the wheel inner protection and go at it with a 22mm wrench from the side.

    Oddly I tried to do it with the wrench from above and it worked !

    Cool
    Image Unavailable, Please Login
     
  23. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #323 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  24. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #324 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
  25. jford10014

    jford10014 F1 Rookie

    Feb 28, 2004
    2,738
    New York, NY
    Full Name:
    Jason
    #325 jford10014, Aug 3, 2016
    Last edited by a moderator: Sep 7, 2017
Page 13 of 23

Share This Page