550 HVAC control knob | FerrariChat

550 HVAC control knob

Discussion in '456/550/575' started by UIUC, Sep 3, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. UIUC

    UIUC Karting

    Jun 12, 2006
    50
    Roswell, Ga
    Full Name:
    Wyatt P Schupbach
    The knobs on my HVAC control are split. You have to buy the entire control unit from Ferrari @ $3,500. The unit itself works fine but the knobs are ever expanding and will soon split in half. I've searched thee forum and including the cross reference. Any ideas Gentlemen?
     
  2. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    We run into this far more than I care to admit. Often, the tabs that hold them in the panel are broken and gone. Your only real choice is to try and find used or repair. We repair often. If the tabs are broken and missing, a dab of silicone will hold them on the pots in the board.
     
  3. F456M

    F456M F1 Rookie

    Jan 8, 2010
    3,665
    Oslo
    Full Name:
    Erik
    Are they the same on 456, 355 etc?
     
  4. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    I believe they are but never matched them side by side to be 100% certain....
     
  5. 00 550

    00 550 Formula Junior

    Oct 20, 2009
    412
    FL
    Full Name:
    That guy
  6. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,847
    Southern Md
    Full Name:
    Robbie
    Are you meaning the knobs are broke where you turn them on the front or on the rear where the tabs are they fit onto the shaft?
     
  7. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,847
    Southern Md
    Full Name:
    Robbie
    Yes, the 456, 550, 355 are exactly the same. One large in the middle and two smaller ones on the outer sides.
     
  8. oss117

    oss117 F1 Rookie

    Jan 26, 2006
    4,185
    Plantation, Florida
    Full Name:
    Alfredo
    I have a slightly different problem: the light inside the ON / OFF pushbutton is out
    Is there a way to replace it or what ?
     
  9. Zedtt

    Zedtt Formula Junior

    May 29, 2005
    379
    Southern California
    Full Name:
    Terry
    Isn't this item available at Ricambi? Their catalog shows new ones at $1606. http://www.ricambiamerica.com/car-diagrams/ferrari/v12/gt-group-2-seat/550-maranello/evaporator-unit-and-controls.html ....pretty easy to install.
     
  10. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,075
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Terry- Yup, just nobody wants to spend $1600 instead of repairing or replacing just the knobs. Trouble is the breakers want to sell the entire panel, too. The sticky guys are the best solution.
     
  11. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Yes, we can repair / replace the bulb
     
  12. UIUC

    UIUC Karting

    Jun 12, 2006
    50
    Roswell, Ga
    Full Name:
    Wyatt P Schupbach
    The knobs have cracks on the outside. They function fine just have an unsightly split. It seems a shame that one has to replace the whole unit to get replacement knobs. Thanks for the input thus far guys. At least we know there isn't a 1999 Nissan Pathfinder running around with the same HVAC control unit/knobs. Thanks !
     
  13. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Those cracks can be fixed...
     
  14. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,847
    Southern Md
    Full Name:
    Robbie
    The light is actually attached to the panel, the switch slides over the bulb. So you will need the bulb re-soldered or replaced in the panel.
     

Share This Page