Correct glass fuse for circuit #6 on a '79 GTB???? | FerrariChat

Correct glass fuse for circuit #6 on a '79 GTB????

Discussion in '308/328' started by wolfturbo, Nov 6, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. wolfturbo

    wolfturbo Formula Junior

    Joined:
    Nov 7, 2005
    Messages:
    580
    Location:
    So. Cal
    Full Name:
    Rob W.
    Gents,

    I recently had a major done on my '79 308GTB and when I got it back my door activated interior light didn't work.

    When I popped off my fuse panel cover as part of my troubleshooting, I noticed my fuse for circuit #6 is missing. Note that I have the Birdman fuse panel conversion on this car.

    Can somebody please confirm that circuit #6 does indeed control the door activated interior light, and if so, tell me the correct amps for the glass fuse?

    Thanks to all!

    Wolf
     
    wolfturbo, Nov 6, 2016
    #1
  2. robo330

    robo330 Formula Junior

    Joined:
    Apr 15, 2014
    Messages:
    608
    Location:
    Michigan USA
    Full Name:
    Karl Robertson
    Here are the graphics for the Fuse Block I have from Jonathan Birdman. With his Fuse Blocks, I mad a copy of the attached graphics, had them laminated, cut them out and stuck these to the Fuse Block Cover. Hope they work for you. The Colors and Fuse Sizes are in each image on either side.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    robo330, Nov 7, 2016
    #2
  3. robo330

    robo330 Formula Junior

    Joined:
    Apr 15, 2014
    Messages:
    608
    Location:
    Michigan USA
    Full Name:
    Karl Robertson
    Sorry if they are a little "fuzzy". If you need the Excel file, let me know, or I can make a couple and send them off. Let me know.
     
    robo330, Nov 7, 2016
    #3
  4. wolfturbo

    wolfturbo Formula Junior

    Joined:
    Nov 7, 2005
    Messages:
    580
    Location:
    So. Cal
    Full Name:
    Rob W.
    Thank you Karl. Very helpful and most appreciated!
     
    wolfturbo, Nov 7, 2016
    #4
  5. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ Lifetime Rossa

    Joined:
    Jan 11, 2001
    Messages:
    26,955
    Location:
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    Refer to your OM Section 5 for the fuse information (an injected 308i, like Rob's,will be a little different in some areas).
     
    Steve Magnusson, Nov 7, 2016
    #5
  6. Birdman

    Birdman F1 Veteran

    Joined:
    Jun 20, 2003
    Messages:
    6,689
    Location:
    North shore, MA
    Full Name:
    THE Birdman
    I didn't make those....where did they come from? Nice.
     
    Birdman, Nov 22, 2016
    #6
  7. WaltP

    WaltP Formula 3

    Joined:
    Nov 1, 2003
    Messages:
    1,512
    Location:
    Cape Canaveral/Atlanta
    Full Name:
    Walt P
    WaltP, Nov 23, 2016
    #7
  8. ragtop1

    ragtop1 F1 Veteran Silver Subscribed

    Joined:
    Nov 11, 2006
    Messages:
    5,263
    Location:
    Ontario
    Full Name:
    Larry Warren
    The graphics shown are for a 1985. Are you sure they are the same for a 79 carb ?
     
    ragtop1, Nov 23, 2016
    #8

Share This Page