Plated clamshell alignment pins installed. Image Unavailable, Please Login Image Unavailable, Please Login
Subframes mocked up ready to mount the turbo system. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Closing up the front of the motor and center console. Image Unavailable, Please Login Image Unavailable, Please Login
Shifter linkage hooked up and tested to make sure every gear engages. Image Unavailable, Please Login Image Unavailable, Please Login
turbo exhaust housings and wastegate ceramic coating black. This will reduce engine bay height and prevent the cast iron from rusting up. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
black oxide plated turbo hardware test fitted. Image Unavailable, Please Login Image Unavailable, Please Login
wastegate assembled and mounted. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
vac lines/boost control hooked up with the airboxes. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
installing shift shaft seal/boot. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Closing rear cover up. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
restored axle shields assembled. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
The radiator fans and wiring was burnt out. Image Unavailable, Please Login Image Unavailable, Please Login
Restored suspension hardware ready for assembly. Image Unavailable, Please Login Image Unavailable, Please Login
Bolting in axles. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Intercoolers and heat shields back in. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Bumper fitted. We noticed the exhaust trim was chipped and damaged, it was removed to be refinished. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
More assembly. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
new air filters installed. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
