F1 bleed block leak | FerrariChat

F1 bleed block leak

Discussion in '360/430' started by craigburton, Mar 16, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. craigburton

    craigburton Karting

    Aug 27, 2016
    60
    #1 craigburton, Mar 16, 2017
    Ok, so 6 months ago I had a new F1 pump fitted. Everything was good until the car went for its MOT yesterday. Found some oil on the tray below the right hand side of the gearbox. Shone a torch down there and the bleed block was damp. Fluid level in the tank in the right rear corner is full. The car is booked in with meridian on Monday which is 20 miles away. I am thinking that it should be okay to drive down there... anyone have any thoughts on that?


    Sent from my iPhone using Tapatalk
     
  2. Turbotuner20v

    Turbotuner20v Formula Junior

    Mar 18, 2014
    362
    #2 Turbotuner20v, Mar 16, 2017
    common issue, if fluid level is ok then it should be fine to drive.

    Are you replacing with a stock bleed block or a Hill Engineering?
     
  3. craigburton

    craigburton Karting

    Aug 27, 2016
    60
    #3 craigburton, Mar 16, 2017


    Hill Engineering if the dealer will allow it (franchised dealer)


    Sent from my iPhone using Tapatalk
     
  4. steelej

    steelej Formula Junior

    Jan 15, 2007
    433
    UK
    #4 steelej, Mar 18, 2017
    Main dealer replaced mine with Hill Engineering block, didn't have a problem with it at all.

    John
     

Share This Page