All it really says is optimized the software structure.. (update notes). Sent from my SAMSUNG-SM-G935A using Tapatalk
Gearbox CFC301 (TCU/NCR) - continued Actuator bleed - OK Clutch bleed - OK CFC301 upload/download - not OK Individual solenoid activation - not OK Obviously its no SD3 but it's certainly enough for the DIYer to open the F1 system and/or change a clutch. Thank you very much mechanicservice6.
Mark, Excuse my ignorance and probably dumb question, I'm relatively new to my 2008 F430 F1 Spider, so on a steep learning curve, what is ELP 430? Dave
Hello Dave, The F430 was the F131 EVO as the platform was an evolution of the 360. ELP or sometimes EVO2 is Ferrari internal code for the Scuderia. Your MY08 is EV08 - given a different code due to the electronics changes. Regards, Mark
i got tablet,easydiag adapter,xdiag pro3 program and activation by mechanicsevice6. thanks mechanicsevice6 i want to give some informations about program for people who wants to buy; My car is early F1 2000 modena it does not have first or second version of gearbox because of this program can not see gearbox(it check first and second version gearbox),also program do not see abs and suspension ecu's(program do not have this specs. for modena)
Hi mwstewart My car is 2000 modena early F1 (CFC201F/176552),do you have an idea if i change tcu with 211023 can i do list below; - PIS Adaptation - Self Learning - Reset wear index - Clutch configuration - Clutch actuator bleed - Actuator bleed engagement and selection - Actuators calibration
211023 is also also a CFC201F but I know it was the later TCU for the 360. The program does not officially support a 201 but I would think connecting as a 231 would would work as most of the diagnostic procedures remained the same. I have tested everything in your list on a 301 but another user is experiencing a problem writing decimal PIS values into his 360.
How is everyone getting on with the software? The DIY maintenance stuff seems covered save for the PIS issue on some devices. I have submitted a few defects to mechanicservice6 to help address a few quirks in the definition setup (the mapping configuration for on-screen representation of the TCU data), and request for support of the more advanced diagnosis parameters - some of which are missing.
I've ordered the device and a new android tablet as I'm totally iOS. Hopefully it covers the CF231 CS TCU [emoji106] Sent from my iPhone using Tapatalk
I have this installed and running. Fairly straightforward and any issues were from my lack of familiarity with Android. My car's 500 miles away so I cannot test but asking a question of anyone who may have tried it. My 360 has a hardware version CF231 CS TCU (2016 manufactured) which has to be the latest hardware variant. In the thread it looks like people cannot connect to CS TCU's through the 360 interface as it isn't listed but 231 is listed on the 430 interface so would it be possible to connect through the 430 menu. I can try this when I'm home but interested if anyone else has already. M
That will work fine, Mike. I've used all sorts of cars to connect to my TCUs, including on the SD3; the NCR/TCU procedures and parameters were pretty much standard between models using the same TCU type i.e. 231 or 301.
I've had a good look through this today..... Connects easily to the engine ECU's via the 360 interface. I didn't try the gearbox TCU via the 360 menu as it only lists CFC201's. As above, I went through the 430 menu and selected my CFC231 (CS TCU bought new last year) and it connects fine. Read a few parameters. Clutch wear index ~4300, PIS 4.61 (which was set at 4.7 last year). Leakage values are 43 and 3 (clutch open and closed) Couldnt see a wear reading but it can be calculated from the current and new clutch closed positions which are available. Some basic spelling mistakes so I guess English isn't the first language of the coder. Overall very impressed....thanks MS6! Sent from my iPhone using Tapatalk
anyone got the updated software they can send link for? MS6 PM me a couple weeks ago saying it was out but i was waiting on a new tablet to arrive to load-- and cant PM him now as his message box is full-- i have 3.09.017 and he said a newer one was out
my ferrari is v10.21 does anyone have link for 10.22- the other soft version i posted above was the full xdiag version..
Last time I opened the xdiag app on my tablet while connected to the internet it notified me there was an update for the app.. I don't have my tablet with me but I'm pretty sure it was the v10.22. Are you opening the app while connected to the internet?
Just purchased the dongle myself. I know you can view the clutch degradation index, does anyone know if it is possible to reset it?
i was able to get a pm thru to MS6 - got a new version to try-- anyone had any issues on tablets>? i got a Tab E to try and load - software loaded fine on play store but on the PC i cannot view any of the folders like i could on the Note4 when i did it. my pc is windows 10 pro- when i see xdiag folder all i see is 19 files and all PDF no folders to view system files and no menu to show hidden files
I downloaded an android file explorer to move the files around but I can't remember which one but was one of the top ones on google play. 10.22 is a very minor update according to the version history. Software works great on a 360 with CS TCU [emoji106] Sent from my iPhone using Tapatalk
